Media Library / Images

ZVA Slimline 2

Automatic nozzle DN 19, for flowrate max. 80 l / min. Product Sleeve EK 043 blue, Slimline dispensing hose assembly

TGN 4" Al tank truck flange with threaded nipple, VK 100 Ms male TW coupler, MB 100 Al dust cap, chain

ZVA Slimline 2 GR nozzles

SG 1" - SSB 16 Propeller

Sight Glass with SSB 16 Safety Break. Compact and lightweight combination of the functions hose swivel, Safety Break and Sight Glass (with propeller).

LTW 75 hose assembly

with MannTek DDC Dry Disconnect Coupling; use eg. as connecting hose for heating oil trailers

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

CBC-PERC 100

Cryogenic Breakaway Coupling "PERC" for LNG after pneumatic separation

ERV-G 100.16

YELLOW BAND Rubber Expansion Joint suitable for petroleum based products with aromatic content up to 50%, fuels (ethanol content up to 85 %), aviation fuels, town gas and natural gas except liquefied petroleum gas. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

M-St 50 SSE

Female threaded hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

Production MannTek, Sweden

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Elaflon PTFE 38, AMKC 38

Universal hose, Elaflex Camlock quality coupling

Urea solution filling, truck: ZVA HV for AdBlue® nozzle

Elaflex Pacific Pty., Australia: workshop

V 19-1" cr

Male ferrule hose coupling EN 14424, reusable. Slimline 19 SF (sulphur free) hose, black.

HD-C LT, Low Temperature

Antarctica: Low Temperature aircraft refuelling hoses in action; fuel transfer from drums via mobile pump

ELAFLEX Hamburg

Manufacturing bronze corrugated pipes

Safety Swivel Break

SSB 16.0

Requirements to a Hose

(English)

Production plastic parts

Injection Molding

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: after release

ElaSil® Silicone hose assemblies

Connecting Triclamp

ZVA Slimline 2 with SG 1" Al Sight Glass

ERV-W 80.16 ZS 2

White Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

UTD hose assemblies in Ex-zone

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

Unloading chemical road tanker, Methanol

UTS hose assembly

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

KWZ x VK 80

Rail car adapter with TW male coupling