Media Library / Images

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

Hose assemblies

Polypal Clean with RMC, LPG with ACMX, Polypal Plus with SFC-SS, Tecnopal with MK-SS

PHD 100, airport depot

VB 80 Al

TW dust plug, aluminium

ZVA Slimline 2

with blue product sleeve and guard no. 3

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Production Picture 3

HD-C, aircraft refueller

Flexible bronze pipe connectors

Installed in suction pipe between dispenser and underground storage tank

ZVA Slimline 2

Hose assembly for petrol stations

COAX hose SL 21, with inner vapour hose, for vapour recovery Stage II

Manufacturing of stainless steel turned parts

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ZVA Slimline 2 GR, hand

scuffguard and product sleeve green, Slimline hose assembly with Colour Sleeve green

ERV-W 80.16

WHITE BAND Rubber Expansion Joint for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, red.

Locomotive refuelling

ZV 32 DB nozzle with Renk coupling

Hose Reels group picture

Movable, pneumatic rewind system, active Vapour Recovery (VR) for gasoline fuels

ERV-CR ... ZS

"CR" Rubber Expansion Joints; water purification plant

AN 51/2 SS

Welding nipple 51/2" stainless steel

Oasis BV701 Ball Valve, with air torque actuator AT101, for CNG

GasGuard LPG nozzle GG20DN

With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.

Universal hose assembly UTL 63 with VC 63-3" SS / SS and MK-A 80 SS

SMX 50-2"

Female hose coupling of steel with Spannfix clamps

Fire-resistant cover for hoses

Guards for ZVA nozzles

suitable for all dispensers, world wide

DDC-K 3" Al ADR with pressure relief

Cap for DDC-V 80
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

Slimline 16 green

Quality dispensing hose for the forecourt

Marine bunkering and cargo hoses

ship to ship cargo transfer

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 ACME nozzle, LPG 16 hose

Polypal Plus universal hose / Polypal Oil universal hose with oil resistant cover