Media Library / Images

DCC Dry Cryogenic Coupling for LNG

Coupling process

ZVA Slimline 2 TMV nozzle for Diesel with DRIP STOP spout

GasGuard LPG nozzle GG30

LPGas nozzle with Bayonet connection according to EN 12806 - 2003 for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane. New : 4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

MannTek DGC DryGasCoupling for L.P. Gas

DGC-V 80 F, DDC-K 3" NBR

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, depot

TW 100, DDC-M 100, airport depot

Dry Disconnect Coupling for Loading/Unloading

ZVF 50 JET overwing refuelling

with HD-C hose assembly

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

Hose assemblies

with flanged coupling, Dry Disconnect Coupling, TW coupling

ZVA Slimline 2, ZVA Slimline 2 GR (Special type with PowerPerformer)

ERV with FSH:

Flame protection cover (closed)

LeverAssist hold-open aid for ZVA Slimline 2 nozzles

Hose assemblies and Rubber Expansion Joints for the chemical industry

ERV-GR TA, UTL with DDC, FXD with male thread, Elaflon Plus FEP with foodstuff fitting, Elaflon PTFE with female thrad

Offshore FSRU (Floating Regasification Unit), connector for gasoil sludge / seawater

DDC-V 150 F

Fluorline EFL 21

Universal pump hose DN 21 for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents. Ideal for highly sensitive media such as AdBlue^® urea solution. Temperature range - 40° to + 100° C. Burst pressure > 64 bar.

ERV-G 1000

'Yellow Band' Rubber Expansion Joint - for petroleum based products

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

GasGuard LPG nozzle GG30: optional Magnet in the guard

For contactless activation of dispensers with reed switch technology

Oasis 'Priority Panel' with ball valves for CNG bus refuelling

DDC-K 3" SS ADR

Pressure Cap, e.g. für LPG - Special type PN 25, ADR / RID compatible. With pressure indicator and pressure relief valve.

Unloading petroleum products at the service station (road tanker to UST)

Connection offset UST filling point: LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

Rubber Expansion Joint ERV-GS 80.16

YELLOW STEEL expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Temperature (depending on medium) range - 20° C up to + 90° C, temporarily up to + 100° C. Fire resistant (to ISO 15540) up to 30 min. and 800° C. Electrically dissipative.

Hose Reel with hydraulic rewind system blue, TW 100, DDC-M 100

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75, DDC-K 3" SS ADR

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose. DDC cap with pressure relief at container tank outlet.

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose

ERV with black, conductive PTFE lining 'TA OHM'

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Dispatch

Ship bunkering

FHD hose assembly, flange connection

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

Adapter: MK 50-45° SS x VK 50 SS

The lever is bent to enable lever arrest (safe position when coupled)