Media Library / Images

FGN 2 SS

Flange with male thread, stainless steel

Slimline dispensing hose SF (sulfur-free)

Fuel producers spend considerable effort in fulfilling the maximum allowed sulfur content. Rubber compounds of this hose type are free of sulphur – ensures that the sulphur content of the fuel is not increased, even if the medium remains for a long time within the hose

Universal hose assembly UTL 63 with VC 63-3" SS / SS and MK-A 80 SS

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ERV-G rubber expansion joint

ERV-G AF DN 80, with TW flanges

L.P.Gas road tanker, Hose Reel with LPG 50, MannTek DGC

DGC-M 50 SS, DGC-K

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Sand casting

ZVA Slimline 2 with SG 1" Al Sight Glass

Adapters / couplers for vehicles fighting dangerous goods incidents:

Adapter Hebelarmkupplungen AVK 50 SS/Vi x VK 50 SS/Vi, AMK 50 SS/Vi x VK 50 SS/Vi, AVK 75 SS/Vi x VK 50 SS/Vi

Oasis FV103 with NC203 P36, Light Duty Fill Valve and Transit Nozzle for CNG

Type PCS 38 (Polypal Clean DN 38 mm)

ERV-G 150.TW, ERV-G 80.TW

Aircraft refueller

Coax hose assembly, section view

SG 1½" Al

Ssight glass for ZVA 32 nozzles, e.g. for aviation refuelling.

Graphic Drip Stop spout for ZVA Slimline 2 nozzles

Aircraft Refuelling Skid

HD-C hose assembly, ZVA 32 nozzle, SG1Al sight glass, hose reel made by ELAFLEX Italy

Fuel delivery at the petrol station

LTW 75 fuel delivery hose, MKX 80 female TW coupler

DAC-M 65, DAC-V 65

MannTek Dry Aviation Couplings

Double Closing Safety Swivel Break

SSB 25 DC

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

Rail tanker unloading of petroleum based products

LTW hose assemblies; Poland

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ZVA Slimline 2 nozzles special version, Slimline dispensing hoses blue / red

Thailand

DAC-V 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading

MannTek FFBV

Full Flow Ball Valves 2-way

SSB 32, SSB 25, SSB16

Safety Swivel Breaks (SSB)

SG 1" 1x0 Al

Sight Glass, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Maintenance at the petrol station

Camlock Cam Locking hose tails AMK-St 50 Ms and AVK-St 50 Ms (brass)

Road tanker for heating oil delivery, HD hose assembly, ZH 50 nozzle, MK 80 Ms coupler with VB 80 Al dust plug