Media Library / Images

Oasis EC100 electrically isolating couplers for CNG

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

FGN 3" SS

Flange with male thread, stainless steel

VB 80 Al

TW dust plug, aluminium

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

Slimline dispensing hose SF (sulfur-free)

Fuel producers spend considerable effort in fulfilling the maximum allowed sulfur content. Rubber compounds of this hose type are free of sulphur – ensures that the sulphur content of the fuel is not increased, even if the medium remains for a long time within the hose

Unloading chemical road tanker

Solvapal hose assembly with DDC Dry Disconnect Couplings

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

Overwing refuelling ZVA 25

HD-C hose assembly

Manufacturing of stainless steel turned parts

MannTek DGC DryGasCouplings

with integrated SBC Safety Breakaway Coupling

Elaflon Plus FEP hose assemblies, SBC Safety Breakaway Couplings

AdBlue® urea solution, road tanker:

DDC-M 50 Dry Disconnect Coupling, UTL 50 hose assembly on reel

Road tanker with hose reel spring rewind blue, ZVA Slimline 2 green

Mobile refuelling

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, red.

Aircraft refuelling: MannTek sampling unit in hydrant system

Connection road tanker to trailer: LTW hose assembly, DDC Dry Disconnect Coupling

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose

SG 1" 1x0 Al Propeller

Sight Glass with propelller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

HD 10 C sensing hose

Composite hose assemblies with 'COPSAFE' , suitable for COP systems (cross-over prevention)

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Rubber Expansion Joint ERV-G LT 80.16

YELLOW BAND LT expansion joints designed for low temperature applications for standard-conform petroleum based products, e.g. diesel, heating oil up to + 90° C, aviation fuels, petroleum up to + 60° C and gasoline up to + 40° C. Temperature (depending on medium) range - 40° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

ZVA Slimline 2, Splashguard, Slimline 16 hose assembly

Camlock Cam Locking male adapter AVK 50-2" Ms (brass)

Slimline quality dispensing hose for the forecourt

Oasis BV701 Ball Valve, with air torque actuator AT101, for CNG

Oasis SV108_SV104 Sandwich Valves with handle, for CNG

ELAFLEX Hamburg

ERV inner protection sleeve/tube "SR"

SSB 32, SSB 25, SSB16

Safety Swivel Breaks (SSB)