Media Library / Images

ELAFLEX refuelling equipment:

Quality is in the detail.

RS 2 x 2 Ms

Reducer Female/Male

HD-C Neon, large reel, VK 100 Ms, MB 100 Al

Slimline 16 yellow

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly with cover hose, bonding cable

LTW 75 hose assembly

with MannTek DDC Dry Disconnect Coupling; use eg. as connecting hose for heating oil trailers

Hose Connection with TW coupling, TSG 3" Sight Glass

MK 80-32° coupling with bent lever. For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

ZVA Slimline 2 with reduced spout and Slimline hose

here: for gasoline, use in countries without vapour recovery regulation

GasGuard LPG nozzle GG20

With long connector nut to access 'hard to reach' fill points. Economic type for industrial refueling / attended refueling. Release volume on valve closure: 1,9 cm³.

ERV-GR Green Band rubber expansion joint, Biogas entergy plant

Construction site / on site refuelling:

ZVA 32 (automatic nozzle), road tanker

Universal hose assembly

PCS 75 (Polypal Clean DN 75 mm) with MX 75-3" SS and DDC-M 80-3" SS Dry Disconnect Coupling

ERV ZS from DN 250 (PN 16)/350 (PN 10):

Tied Flanges – Type ZS, Tie rods with outer limitation in spherical discs and conical seats

Pharma hose fittings

CNG Safety Break (Hose Break)

separated

MC 75-3" SS

Female hose coupling for hoses, stainless steel, with Spannloc clamps

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

DDC-V 50 SS F

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with flange connection

ELAFLEX Hamburg

Assembling VSRV bolted vacuum support ring

ERV-R 80.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

Connection road tanker to trailer: LTW hose assembly, DDC Dry Disconnect Coupling

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

and Slimline dispensing hose, black

Ship bunkering with LNG

DCC Dry Cryogenic Coupling with cap; CBC Cryogenic Breakaway Coupling

BK 3 Ms

Cap with 3" female BSP thread, brass

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, depot

IBC metal container; UTS hose assembly

ERV Rubber Expansion Joints

Picture 3

Solvapal 32

Solvent hose to EN 12115 for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.

Hose Reel spring rewind red, SL 19 black, ZVA Slimline 2 green

ELAFIX 40

Magnet adapter for installation in filler necks from DN 40. This adapter allows the refilling of urea solution with ZVA HV for AdBlue^®, without the risk of misfillings. Meets ISO 22241-4.