Media Library / Images

Stainless steel Hose Reel spring rewind black, FEP 38, DDC-M 50 SS

Oasis CNG refuelling equipment:

Ultra Fast Fill System (Diagram, German)

MannTek, DDC-M 50, DEC-M 38, DDC-M 80, DCC-M 50, DGC-M 80, DAC-M 65, DAC-V 65

Boat refuelling with L.P. Gas

GasGuard nozzle, LPG 16 hose

AdBlue® urea solution, road tanker:

DDC-M 50 Dry Disconnect Coupling, UTL 50 hose assembly on reel

Production MannTek, Sweden

ZVA Slimline 2 GR (vapour recovery nozzle), CSB 21 Coax Safety Break, Coax dispensing hose

Stainless steel Hose Reel with pneumatic rewind system, FWS 50 PP

GasGuard LPG nozzle GG1DN

suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure: 1.7 cm³.

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Aircraft refuelling: MannTek sampling unit in hydrant system

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, red.

SX 50 SS

Spannfix clamp DN 50 of stainless steel

Drum unloading chemical industry

UTS hose assemblies with Easyloc cam locking couplings

Safety Swivel Break

SSB 16.0

Heating oil delivery: ZV 500 nozzle, HD hose

Oasis BV706 ball valves with Code 62 flange and SAE connection, for CNG

Flame resistance test hose

Coloured hose assemblies for the forecourt

Slimline 21, M 21-1" NR

IBC unloading

Coupling of chemical hose assembly with AMKC 50 SS (Camlock female with Spannloc attachment) to AMKI male coupling. Use of IBC-reducer RS 60 x 2 SS, directly attached to IBC.

Universal hose assembly

PCS 75 (Polypal Clean DN 75 mm) with MX 75-3" SS and DDC-M 80-3" SS Dry Disconnect Coupling

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

Colour production: mixer

UTS hose assemblies

Hose assemblies

with flanged coupling, Dry Disconnect Coupling, TW coupling

ELAFLEX Hamburg

ELAFLEX stock

Hose Trolley HTR-T

for terminal operations

BK 3 SS

Cap with 3" female BSP thread, stainless steel

TW coupling wrenches of brass or steel

EW K 50 Ms, EW K 80 Ms, EW K 100 Ms, EW K 50 St, EW K 80 St, EW TWS 50, EW TWS 80

Oasis CV Heavy Duty Check Valves for CNG