Media Library / Images

Oasis FV103 90° Fill Valve with Bus & Truck Nozzle, for CNG

LPG Autogas Adapter (filler inlet) BAYO

Bayonet connection

Heating oil delivery: ZV 500 nozzle, HD reel hose - up to 80 mtr length

ERV-G 150 TW, ERV-G 100 TW, ERV-G 80 TW

Polypal Clean hose assembly

Pharmaceutical production

ZVA Slimline 2 and ZVA Slimline 2 GR

Dispenser, Czech Republic

ELAFLEX Hamburg, narrow aisle stock for small parts

ZVA Slimline 2 and ZVA Slimline 2 GR, special colour light green

Bonding Reel, HD 100, ZVF 50 JET, Aljac Closed Circuit Sampler

Airfield refueller

AMK-St 38 SSE

Camlock female coupler, hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

ELAFLEX Hamburg

Hose stock

HD-C NEON hose with new, REFLECTING marking

Optional service for hose assemblies:

BandIt hose marking with test data

ERV-GS; ERV-G

Rubber Expansion Joints - use in ship engine room

Colour production: manifold

UTS and FWS hose assemblies

GasGuard LPG nozzles

and LPG 16 orange hose assemblies for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane.

HD 100 C NEON, HD 10 C sensing hose

Type HD-C, aviation hose

Heating oil delivery: HD reel hose, bulk nozzle

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Ship bunkering with LNG

DCC Dry Cryogenic Coupling with cap; CBC Cryogenic Breakaway Coupling

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

VB 50 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

Solvapal hose assemblies

Solvents

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

and Slimline dispensing hose, yellow

V 63 2½" SS

Hose coupling with male thread

"Yellow Band" Rubber Expansion Joints, aircraft dispenser

ERV-G 200, ERV-G 150

EK 145 Product Badges for ZVA nozzles

Malaysia

Road tanker reel with HD 50 hose assembly, ZV 500 nozzle