Media Library / Images

Tank storage, mixer: LTW hose assemblies

Locomotive refuelling

Dispenser, ZV 32 DB nozzles with Renk coupling

ERV VSRV:

ERV with bolted vacuum support ring. For maximal vacuum resistance of the selected ERV. Bolted ring in stainless steel AISI 316 Ti.

Type PCS, Polypal Clean

one side with RMC foodstuff fitting / Spannloc clamps stainless steel, other side open (note the inner conductive stripe)

Compact Line HD 50, Hose Reel Spring Rewind

FEP 5O, MannTek DDC-M 5O SS

V 16-1" cr

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, red.

HD 100 C, HD 10 sensing hose

Aircraft Dispenser with DN 100 hose (spiralised marking) and a sensor hose to control the hydrant system.

ERV-R

"Red Band" Rubber Expansion Joints with limiters / pump station

Hose Connection with TW coupling, TSG 3" Sight Glass

MK 80-32° coupling with bent lever. For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ERV-R Red Band rubber expansion joint, ship engine room

Production MannTek, Sweden

ERV-R

"Red Band" Rubber Expansion Joints/ Osmose

FSH flame protection cover for ERV rubber expansion joints

Use e.g. in ship engine rooms

SPANNLOC bolted safety clamps of aus stainless steel

SC 75 SS

SVC 50-2"

Male hose coupling of steel with Spannloc clamps

Camlock Cam Locking hose tail AMK-St 50 Ms (brass)

for the assembling with Spannfix or Spannloc clamps

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Petrol station in Singapore

ZVA Slimline 2 nozzle, SSB 16 Safety Break, Slimline hose assembly

Rubber Expansion Joint ERV-GS 80.16

YELLOW STEEL expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Temperature (depending on medium) range - 20° C up to + 90° C, temporarily up to + 100° C. Fire resistant (to ISO 15540) up to 30 min. and 800° C. Electrically dissipative.

Aircraft refuelling: MannTek sampling unit in hydrant system

Hose assembly for petroleum based products

LTW 75, VC 75-3", DDC-M 80-3"

Pipe with AVKI 50 SS, hose assembly with AVKX 50 SS

'Camlock' stainless steel female and male coupling to EN 14420 - 7

Hose Reel with hydraulic rewind system orange, LPG 32, DGC-M 50

Heating oil delivery: HD reel hose, bulk nozzle

GasGuard LPG nozzle GG20DN

With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.

ERV-G AF

Suitable for piping systems of aviation refuelling or dispensing vehicles in accordance to EN ISO 1825/EI 1529. Suitable for all aviation fuels.

ELAFLEX Hamburg, stock bellows

FFVF Full Flow Ball Valve, ERV-G ... TW

Aircraft refueller

ERV-G

with vacuum support spiral