Media Library / Images

Ship loading various media - STW 150 and UTS 150 hose assemblies

ContiTech Production ERV

manufacturing the blank

DDC-K ADR:

DDC Dust Caps with Pressure Relief Valve to ADR Requirements. These pressurized dust caps PN 10 of aluminium for DDC male adapters on road tankers are much lighter than the PN 25 versions of stainless steel.

ARK 19 Safety Break including BS 19 Break Sleeve

Safety Break (Hose Break) for installation to LPG Autogas dispensers. Reassembly on site without tools

DAC-V 65

MannTek Dry Aviation Coupling

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, green.

Rail tanker unloading of petroleum based products

LTW hose assemblies; Poland

Rubber Expansion Joint ERV-GS HNBR 80.16

YELLOW STEEL HNBR expansion joints for petroleum based products, DIN EN fuels up to 50 % aromatic content, cooling water with oily anticorrosion additives, lubrication and hydraulic oil, seawater. Very good aging, weathering and ozone resistance. Temperature range (depending on medium) - 35° C up to + 100° C, temporarily up to + 120° C. Fire resistant to ISO 15540 up 30 min. at + 800° C. Electrically dissipative.

Upstream Oil Industry, TW hose assemblies

Kuwait

Unloading: MK couplers with DDC-V 80 adapter

DDC-V 50 SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with BSP thread connection

Adapter coupling DGC / ACME

DGC-V 50 x 1 3/4" ACME. Dry Disconnect Couplings are state of the art for the fast and safe loading/unloading for liquefied gas (LPG). Connecting with standard fittings is still possible with adapters, like this one with ACME thread.

Unloading petroleum products at the service station (road tanker to UST)

MK 80-32° coupling with bent lever. For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, yellow.

IBC

with CHS chemical hose assembly

Elaflon Plus FEP

hose assemblies, lacquer filling

KR 50 - 21/2"

Filling of Heating Oil Tanks: New Adapter for difficult-to-reach house connectors

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

DAC-V 65, DAC-M 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading - in action

Adapter: MK 80-32° Ms x MK 80-32° Ms

Special type with bent levers. The lever is bent to enable lever arrest (safe position when coupled)

Hose assembly for petrol stations

COAX hose SL 21, with inner vapour hose, for vapour recovery Stage II

Oasis FV103 with NC203 P36, Light Duty Fill Valve and Transit Nozzle for CNG

ELAFLEX Hamburg, large new narrow aisle stock 2018 for hoses

ZVA 25 for AVGAS

red scuffguard, AVGAS sticker; Slimline hose assembly

AMKC 50 SS

'Camlock' stainless steel steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

Tar (bitumen) spraying hose HB-ST in action

AMK-St 50 SS, AVK-St 50 SS

'Camlock' stainless steel female and male hose tails to EN 14420 - 7

Fuel Grade Identification to EN 16942 for ZVA Nozzles

Type EK FGI

Tank truck and trailer with HD 45 hose reel, ZV 500 nozzle