Media Library / Images

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

Adapter coupling DGC / ACME

DGC-V 50 x 1 3/4" ACME. Dry Disconnect Couplings are state of the art for the fast and safe loading/unloading for liquefied gas (LPG). Connecting with standard fittings is still possible with adapters, like this one with ACME thread.

ZVA "LT" nozzles

Low Temperature type -40° C for cold regions

Slimline quality dispensing hose for the forecourt

Assembling "ZS" tie rods to ERV rubber expansion joints

Tank storage: manifold with DDC Dry Disconnect Couplings, TW hose assemblies

ZVF 25 with EKG and GKG

Manual nozzle DN 25 for aircraft overwing refuelling, with ground cable assembly, dust cap assembly. NEW: free of non-ferrous metals to JIG rules. Note: yellow chrome plating on swivel is 'free or non-ferrous metal'.

Hose tube of road tanker for chemicals

MK-A 80 SS with active safeguard lever ; VB 80 SS dust plug

ERV-R 150.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

Elapharm clamp fittings

VX 75-3" Ms

Male hose coupling 3" BSP of brass with Spannfix clamp

ERV ZSS:

Tied Flanges – Tie rods with inner and outer limitation

Ship loading/unloading various media - STW 150 and UTS 150 hose assemblies

SPANNFIX pinned Sicherheits Klemmbacken aus aluminium

SX 75 Al

Filling of Heating Oil Tanks: Adapter KR 50-2 3/4" (Switzerland)

for difficult to reach filler inlets

ELAPHARM Type EPH 25

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

SFC 38 SSE

Swiveling flange hose coupling with Spannfix clamps. Material: stainless steel with universally resistant PFA coating (red)

ELAFLEX quality: section view of a ERV bellows

ERV-OR "Orange Band"

ELAFLEX Hamburg

Hose stock, reeling up a FEP hose

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

ERV-G 100.16

YELLOW BAND Rubber Expansion Joint suitable for petroleum based products with aromatic content up to 50%, fuels (ethanol content up to 85 %), aviation fuels, town gas and natural gas except liquefied petroleum gas. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

Offshore FSRU (Floating Regasification Unit), connector for gasoil sludge / seawater

DDC-V 150 F

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

ZVA Slimline 2

with Sight Glass

Flexible bronze pipe connectors

Installed in suction pipe between dispenser and underground storage tank

ZV 19.1

ZV 19 manually operated dispensing nozzle, DN 19 (3/4"), for diesel, fuel, petroleum and oils (also vegetable oils) up to 100 ltr./min.

Boat refuelling Australia

ZVA Slimline 2, Slimline hose assembly

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, green.

ZVA 25 GR

For the filling of small containers and IBC with solvents. With vapour recovery.