Media Library / Images

IBC loading and unloading

MannTek DDC-M 50, FWS 50 PTFE

VR Hose Reel Spring Rewind, ZVA Slimline 2 GR blue

for active Vapour Recovery (VR) for gasoline fuels

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

MK 80-90 SS; MK coupling stainless steel with bent lever 90°

TW coupling with bent lever: For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

Terminal / gantry: 'Polypal Oil' hose assemblies for bottom loading of road tankers

Lining UPE - resistant to all petrochemical media, also with high content of aromatics or other aggressive additives; cover CR - oil resistant

Adapter: MK 50-45° SS x VK 50 SS

The lever is bent to enable lever arrest (safe position when coupled)

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

Road tanker with large hose reel, HD hose assembly, ZV 500 nozzle

ZVG 2 DISH nozzle for L.P. Gas / Autogas, LPG 16 hose assembly

MannTek Safety Breakaway Coupling SBC 80 SS F

with flange connection

ERV-G ... TW

Aircraft refueller

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, yellow.

L.P. Gas road tanker: long hose reel, LPG 32 hose assembly

ELAFLEX Hamburg

ZVA Slimline 2 GR

ELAFLEX Hamburg

Assembling dispensing hose fitting

ZV 19.1 TD

ZV 19 manually operated dispensing nozzle, DN 19 (3/4"), up to 100 ltr./min. Special version for chemicals/solvents with PTFE seals.

ERV-G 150 TW, ERV-G 100 TW, ERV-G 80 TW

Flange hose tail stainless steel, steel flange

Ship loading Naphta - STW 150 hose assemblies

FGN 2 St

Flange with male thread, steel zinc plated/chromated

ELAPAC FD flat sealing material

2 or 3 mm thickness, available as coil, standard size seal or in custom shape. An elastic flange seal for tank truck and tank plant construction etc., where rough sealing surfaces require a high adaptability, where flange seals should still have good flexibility to avoid pipe fractures or simple sealing materials because little or no force can be used to tighten the joint.

TW coupler MK 80 SS-90° (bent lever) and dust plug VB 80 ADR SS with pressure relief

SD Pyropal hose assemblies for saturated steam in the chemical industry

MS 19-3/4" hose fittings for saturated steam

LH2 Refuelling

'N-LH2' nozzle for LH2 truck refuelling of cryogenic hydrogen

TSG 3" Rg

tank truck sight glass type TSG 3", one end TW tank truck fl ange according to DIN 28459, other end male thread

ERV-R

"Red Band" Rubber Expansion Joints/ water treatment

Oasis 3/4" Ball Valve for CNG

LPG Autogas Adapter (filler inlet) ACME

ACME thread 1 3/4"

GasGuard LPG nozzle GG30

LPGas nozzle with Bayonet connection according to EN 12806 - 2003 for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane. New : 4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

Production MannTek, Sweden