Media Library / Images

Hose assemblies

for saturated steam, chemicals, petroleum based products

Unloading petroleum products at the service station (road tanker to UST)

Connection offset UST filling point: LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

DGC-V 50 F SS for L.P. Gas, PN 25/40

Dry Disconnect Coupling with flange connection, DN 50, stainless steel, with rubber dust cap

Upstream Oil Industry, TW hose assemblies

Kuwait

MB 80 Al

Dust cap for VK 80, aluminium

Vehicle refuelling Korea with LPG (L.P. Gas, Autogas, Propane)

ZVG 2 K nozzle, LPG 16 hose assembly

ELAFIX 40 Anti-Siphon

Magnet adapter for installation in filler necks from DN 40. This adapter allows the refilling of urea solution with ZVA AdBlue HV, without the risk of misfillings. Meets ISO 22241-4. - Version with anti-theft protection -

Storz coupling; water connector ship

Elaflex Cam and Groove Couplings ('Camlock'): AMKX 50 EASY

EASYLOC stainless steel coupler to EN 14420 - 7, with lever arrest. Picture shows the version as one-piece coupler with integrated hose tail and Spannfix stainless steel clamp

ERV-G

"Yellow Band" Rubber Expansion Joints for L.P. Gas; pumping station at tank storage

ZV 500 for chemials

Bulk filling of Methylene Chloride

ZVA Slimline 2 GR

with red scuffguard; CSB 21 Coax Safety Break with BS 21 Break Sleeve; Slimline COAX hose assembly

Unloading: MK couplers with DDC-V 80 adapter

Railtanker

MannTek DDC-V 80 F Dry Disconnect Couplings (tank unit with flange), Pressure Caps PN 25 with pressure relief

Elaflex Pacific (Australia)

ERV-R 150.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

GasGuard LPG nozzle GG30

4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

LNG Refuelling

Vent Coupling 'VC-LNG'

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, blue.

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Sand casted products to your design

In our modern foundry we can produce complex sand casted aluminium, bronze and gunmetal products to your requirements.

MC 75-3" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

Vehicle refuelling with LPG (L.P. Gas, Autogas)

GasGuard GG1 nozzle, Butapal hose

MannTek Dry Disconnect Couplings:

DDC-V 50-2", DDC-V 50 F, DDC-M 50-2", DDC-M 80-3"

Oasis TH Tank Head Valves, CNG trailer

Multi Product Dispenser with ZVA Slimline 2 nozzles, SSB 16 Safety Breaks with BS 16 Break Sleeves

RM-St 50 SSE

Female foodstuff threaded hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

EA 866 scuffguard orange with ZVG 2 ACME nozzle

The scuffguard for LPG / Autogas nozzles shows the LPG fuel grade marking required by standard, and offers a large advertising space

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 EURO UL with EA 866 scuffguard, LPG 16 hose