Media Library / Images

ZVA LV for AdBlue® with SSB 16 LV SL 16 for AdBlue® hose assembly (blue)

Terminal Railtanker

LTW 100, MK 100, VK 100, SBC 100-4, FFBV 100

ELAFLEX Hamburg

Commissioning / Pick by Voice

MannTek, DDC-M 50, DEC-M 38, DDC-M 80, DCC-M 50, DGC-M 80, DAC-M 65, DAC-V 65

Ship bunkering with LNG

Coupling of DCC male and female part DN 50; left hand side CBC 50 Cryogenic Breakaway Coupling

Connection UTS hose assembly

Belgium

MannTek DGC DryGasCouplings for L.P. Gas

DGC-M 50-2" with DDC-S dust plug

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly, vent hose assenbly with 'VC-LNG'

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

MannTek Dry Gas Couplings, Safety Breakaway Couplings and swivels for LPG

Boat refuelling, Hose Reel, ZVA Slimline 2 GR

Hose reel with active Vapour Recovery (VR)

Storz Safety Coupling SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

Elaflon PTFE

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ElaSil® Silicone hose assemblies

Connecting Triclamp

ELAPHARM Type EPH

Premium refuelling equipment from ELAFLEX

Dry Evotek Coupling DEC

Dry Coupling for the chemical industry, road tanker unloading with UTS hose assembly

FWS composite hoses / hose assemblies

Type FWS PP with female threaded fitting, Type FWS PTFE with stainless steel flange

Rail tanker unloading of petroleum based products

FWS PP St/St composite hose, MannTek Dry Disconnect Couplings

ZV 400, HD hose assembly on road tanker

PSB Pump Safety Break for High Hose Dispensers

Picture shows separation of the Slimline hose assembly after a drive-off accident

Ship loading various media - STW 150 and UTS 150 hose assemblies

LMS 50 Blue Band solvent hose with helix

Coupling: RMC 50 SS / SS, foodstuff thread, Spannloc clamps of stainless steel

ELAFLEX refuelling equipment:

Quality is in the detail.

Hose Reel with HD 38, ZVA 25, Bonding Reel red

Mobile Cabinet, airfield refuelling

ELAFLEX Hamburg

ELAFLEX stock

Oasis BV708, 1" ball valves, isolation valves, CNG trailer loading

L.P.Gas petrolstation, GG20, Slimline, ZVG 2 EURO UL

Truck refuelling

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Swivel assembling