Media Library / Images

Elaflon PTFE 25

Anti-Kinking Spiral 'KSS'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the new Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

DDC-M 100, HD-C, airport depot

Dry Disconnect Coupling, Yellow Band hose, at airport depot

Oasis Fill Valves at CNG service station

Road tanker hose reel, made by Elaflex Italia

with LPG hose assembly

FGN 3" SS

Flange with male thread, stainless steel

ZVA Slimline 2, guard 3, black scuffguard, blue colour sleeve

RMC 25 SS

Hose coupling with female foodstuff thread and Spannloc clamps

SPANNLOC bolted safety clamps of stainless steel

SC 75 SS

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Assembling hall, meterial logistics

Solvapal 32

Solvent hose to EN 12115 for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.

ERV-G 100.16

YELLOW BAND Rubber Expansion Joint suitable for petroleum based products with aromatic content up to 50%, fuels (ethanol content up to 85 %), aviation fuels, town gas and natural gas except liquefied petroleum gas. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

Terminal Railtanker

LTW 100, MK 100, VK 100, SBC 100-4, FFBV 100

Construction of ELAFLEX composite hoses type FWS

Sectioned view of a composite hose

ERV-G Yellow Band rubber expansion joint, installation underneath a road tanker

Universal hose assembly for vehicles fighting dangerous goods incidents:

Aspiration hose PTFE 32 length 2,1 mtr., one side VKC 32.50 SS/Vi SS, other side open

ZVA Slimline 2 LA nozzle with LeverAssist hold-open aid

GasGuard LPG nozzles

and LPG 16 hose assemblies for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane.

Safety Swivel Break SSB 16 SS of stainless steel f. ZVA AdBlue® HV

old design

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ERV ZS from DN 250 (PN 16)/350 (PN 10):

Tied Flanges – Type ZS, Tie rods with outer limitation in spherical discs and conical seats

Oasis BV706, 3/4" pneumatically actuated ball valve for CNG

Road tanker for heating oil delivery, HD hose assembly, ZV 500 nozzle, MK 80 Ms coupler with VB 80 P dust plug

Fluorflex FXD universal hose assemblies with anti kinking spiral KSS

extremely flexible PTFE hose with maximum bending radius and safety against kinking

ERV-G AF

Suitable for piping systems of aviation refuelling or dispensing vehicles in accordance to EN ISO 1825/EI 1529. Suitable for all aviation fuels.

Fuel Grade Identification to EN 16942 for ZVA Nozzles

Type EK FGI

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ZVA Slimline 2 GR, hand

scuffguard and product sleeve green, Slimline hose assembly with Colour Sleeve green

TW hose for fire fighting vehicle with extremely long telescopic crane

ERV Rubber Expansion Joints

Picture 2