Media Library / Images

IBC unloading

Coupling of chemical hose assembly with AMKC 50 SS (Camlock female with Spannloc attachment) to AMKI male coupling. Use of IBC-reducer RS 60 x 2 SS, directly attached to IBC.

KR 50 - 21/2"

Filling of Heating Oil Tanks: New Adapter for difficult-to-reach house connectors

MK-A 80 SS, TW female coupler with Active Safeguard Lever

connected: hose assembly with VKX 75.80 SS

Oasis DMI Dispenser Manifold for CNG

Rubber Expansion Joint ERV-G LT 80.16

YELLOW BAND LT expansion joints designed for low temperature applications for standard-conform petroleum based products, e.g. diesel, heating oil up to + 90° C, aviation fuels, petroleum up to + 60° C and gasoline up to + 40° C. Temperature (depending on medium) range - 40° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

ELAFIX 40

Magnet adapter for installation in filler necks from DN 40. This adapter allows the refilling of urea solution with ZVA HV for AdBlue^®, without the risk of misfillings. Meets ISO 22241-4.

ZVF 50 JET overwing refuelling

with HD-C hose assembly

SPANNFIX pinned safety clamps of stainless steel

SX 75 NR SS

Oasis SV108_SV104 Sandwich Valves with handle, for CNG

FWS composite hoses / hose assemblies

Type FWS PP with female threaded fitting, Type FWS PTFE with stainless steel flange

HD-C aircraft refuelling hose

HD 50 C F

DDC-K 3" Al ADR with pressure relief

Cap for DDC-V 80
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

VB 80 ADR SS with pressure relief

Plug for MK 80
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

TW coupling wrenches of brass or steel

EW K 50 Ms, EW K 80 Ms, EW K 100 Ms, EW K 50 St, EW K 80 St, EW TWS 50, EW TWS 80

Construction of ELAFLEX composite hoses type FWS

Sectioned view of a composite hose, denomination of the components (English)

Slimline 21 red

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

Construction of ELAFLEX composite hoses type FWS

Sectioned view of a composite hose

Heating oil delivery: ZV 500 nozzle, HD reel hose - up to 80 mtr length

ZVG 2 ACME nozzle for L.P. Gas / Autogas

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

AdBlue® urea solution, road tanker:

DDC-M 50 Dry Disconnect Coupling, UTL 50 hose assembly on reel

Rail tanker discharge coupling KWK, with elbow DN 80

for damaged / dirty rail tanker or other threaded hose connections. Used e.g. for environmental protection trucks

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

Elapharm EPH 25 with foodstuff fitting DIN 11551, free of dead spaces

SL 16 for AdBlue® (blue) hose assembly with anti-kinking sleeve, colour sleeve

Terminal Railtanker

LTW 100, MK 100, VK 100, SBC 100-4, FFBV 100

RMC 25 SS

Hose coupling with female foodstuff thread and Spannloc clamps

LTW 75 hose assembly

with MKX 75.80 Ms

Rail tanker unloading of petroleum based products

Plant side: FWS PP St/St composite hoses, SG 3" Sight Glasses

MK 50 SSE

TW female coupler stainless steel, with PFA coating (red)

BD 63, Hose Beads at airport depot