Media Library / Images

Loading Brine (salt solutíon for winter service): CHS hose asssembly, DDC Dry Disconnect Coupling

VK 80 - 2" IG Ms

TW male coupling brass, with reduced female BSP connection, one piece adapter (special type)

Manufacturing of turned parts

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Lightweight Gravity Discharge Road Tanker Hose LG 4"

with TW couplings

Terminal Railtanker

LTW 100, MK 100, VK 100, SBC 100-4, FFBV 100

Aircraft refuelling

Carter Underwing Nozzle, HD63C Neon, ZVF50, SC50Al, HD50C, Hose Bead BD50

HD-C, ZVF 50, Refueller

Aircraft refueller, overwing refuelling JET

ERV-R

"Red Band" Rubber Expansion Joints with limiters / pump station

FHD 50 special type HIFR

(helicopter in flight refuelling)

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 ACME nozzle, LPG 16 hose

ContiTech Production ERV

Testing UV resistance

Storz coupling on road tanker

Hose assembly with Spannfix clamp and stainless steel threaded connection

FGN 2 St

Flange with male thread, steel zinc plated/chromated

Safety Crimping Ferrule of stainless steel

SH 50 SS

ERV with FSH:

Flame protection cover (open)

Anti-Kinking Spirals 'KSS' and 'KSS-SD'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

Connection aircraft refueller to flanged hose assembly

ERV-G 100 TW, HD 100 C, TW-flange

ERV-GS

"Yellow Steel" Rubber Expansion Joints / ship engine room of a ferry

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

Alternative fuels: DME Dimethyl Ester

DGC Dry Gas Coupling, EFL 16 Fluorline hose assembly

AN 2 SS

Welding nipple stainless steel

VB 80 ADR SS / VB 100 ADR Al with pressure relief

Plug for TW female couplers
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

ELAPAC FD flat sealing material

2 or 3 mm thickness, available as coil, standard size seal or in custom shape. An elastic flange seal for tank truck and tank plant construction etc., where rough sealing surfaces require a high adaptability, where flange seals should still have good flexibility to avoid pipe fractures or simple sealing materials because little or no force can be used to tighten the joint.

Elaflex Hiby Tanktechnik, Production Plettenberg / Germany

Contour check

Motorcycle refuelling at the petrol station

ZVA Slimline 2 GR with special short spout

ERV-OR 65.25

ORANGE BAND Rubber Expansion Joint for Liquid Petroleum Gas (LPG) acc. to EN 589. For tank trucks and refuelling stations. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically dissipative.

VB 100 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Forklift refuelling with LPG (L.P. Gas, Autogas)

GasGuard nozzle, LPG 16 hose

Slimline 16 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.