Media Library / Images

ZVA 25 with red scuffguard and Slimline hose assembly

HIFLO-Automatic nozzle DN 25 (1"), flowrate up to 140 litres/min.

Polypal Clean PCS25, RMC 25

Filling of houshold cleaning bottles

Ship loading with chemicals

UTS 150 hose assembly, ARK-S Safety Break Coupling

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

Cargo loading / unloading of ship, STW 150, Vapour Line

Italy

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, red.

AMKX 50 Ms

'Camlock' brass steel coupler to EN 14420 - 7 with hose tail and Spannfix clamps

Equipment truck for dangerous goods accidents

suitable hose assemblies and adapters from Elaflex, ELAFLEX_Information_2.17E.pdf

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ERV-GR 250.10 SS TA

Green Band Rubber Expansion Joint with PTFE lining

Ship sided connectors for bunkeringof fuel, lube oils, fresh water; unloading of sewage

DDC Dry Disconnect Couplings with caps

ELAFLEX Hamburg

Stock special flanges, pick by voice, scanning

LPG Autogas Adapter (filler inlet) BAYO

Bayonet connection

ElaSil® Silicone hose assemblies

Alternative fuels: DME Dimethyl Ester

DGC Dry Gas Coupling, EFL 16 Fluorline hose assembly

ZVA-RG

Automatic nozzle ZVA DN 19, of red bronze (gunmetal), for solvents and corrosive media. Flowrate up to 60 l / min.

Elaflon Plus FEP hose assemblies:

Bulk filling of powders

Marine bunkering and cargo hoses

ship to ship cargo transfer

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

CNG Safety Break

SB-CNG FLVL-S

CSB 21 Coax Safety Break: Separation

Solvent filling with integrated vapour recovery in the nozzle

ZVA 25 GR, UTS hose assemblies

ERV-G ... TW

"Yellow Band" Rubber Expansion Joints; tank truck

Oasis Fill Valves at CNG service station for buses

UTL 50 universal hose with MannTek Dry Disconnect Coupling DDC-M 65 - 21/2" Ms

Elaflex hoses

SD, PTFE, LPG, TW, FEP, SL

MannTek DGC DryGasCouplings

with integrated SBC Safety Breakaway Coupling

Hose assembly with STKC 75

Storz coupling with Spannloc clamps

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose

Rubber Expansion Joint ERV-BR 80.16

BR Expansion Joints, special type for abrasive media such as sludges, slurries, solid / liquid mixtures and emulsions, dustlike or powdery products (e. g. carbon-blacks). Also suitable for all kinds of water (non oil containing) as well as various chemicals. Not suitable for petroleum based products. For extreme strain (e.g. sharp and rough-edged matter) we suggest the use of ERV with inner protection sleeve type SR