Media Library / Images

ZVA Slimline 2 / ZVA Slimline 2 GR

Connection DDC-M 100 with HD hose assembly to tanker

Ship bunkering from the road tanker

ZVA Slimline 2 GR, black, guard 3 - side view

Storz Safety Coupling SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

EA 866 scuffguard black with ZVG 2 DISH nozzle

The scuffguard for LPG / Autogas nozzles shows the LPG fuel grade marking required by standard, and offers a large advertising space

DEC – Dry Evotek Couplings:

dry disconnect couplings for the chemical industry.
• Low connecting forces even against pressure
• Ergonomic handle (DN40 and bigger)
• Good transmission ratio in the cam curve
• Wide range of chemical resistance due to selection of high quality materials
• Minimized spillage during decoupling

DDC-V 50 SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with BSP thread connection

ZVA_AdBlue_LV_2-Stufen-Anschlag_Step2_mod

Use - 2/2

ZVG 2 ACME nozzle for L.P. Gas / Autogas, LPG 16 hose assembly

SFX 50.16

hose flange; hose tail and swiveling flange of steel, Spannfix clams

Hose assemblies

with flanged coupling, Dry Disconnect Coupling, TW coupling

ZVA-GBZ

Automatic nozzle ZVA DN 19, of cast bronze (GBZ), for drinking alcohol, brandy etc. Flowrate up to 60 l / min.

ZVA AdBlue LV with EA 075 LV

Urea solution (DEF, ARLA 32) for Light Vehicles

ZVA Slimline 2

with Sight Glass

DEC – Dry Evotek Coupling

Dry disconnect coupling for the chemical industry

Production MannTek, Sweden

MannTek DGC-M & DGC-V DryGasCouplings

the alternative to ACME and flanged connections

UTS hose assembly, rail tanker top loading

Rail tanker loading L.P. Gas

DGC Dry Gas Couplings, SBC Safety Breakaway Couplings

Hose Trolley

HTR-AF, HD 100 C NEON, HD 10 C

Safety Crimping Ferrule of stainless steel

SH 50 SS

Safety Swivel Break

SSB 25

HD 63 C NEON, TW 75 E NEON

'NEON' type with reflecting bands or NEON marking in spiral form

Slimline 16 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

Oasis FV103 Fill Valve, CNG service station

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

AMB 50 SS

'Camlock' stainless steel dust cap to EN 14420 - 7 for male adapters AVK with captive seal

MKC 75 SS

TW female one-part coupler, stainless steel

GasGuard LPG nozzle GG1E

eoconomic type for industrial refueling / attended refueling. Release volume on valve closure: 1,9 cm³.

ELAFLEX Hamburg

Construction