Media Library / Images

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

ERV-G 80.TW

"Yellow Band" Rubber Expansion Joints; tank truck

ZVA Slimline 2 without scuffguard: body markings

Construction site / on site refuelling:

ZVA 500 manual bulk nozzle

V 16-3/4"

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, green.

Tank storage: manifold with DDC Dry Disconnect Couplings, TW hose assemblies

Oasis NGV / CNG Refuelling Equipment

KWB 1

Coupling dvice for the connection of saturated steam hoses with heating up systems of rail tankers

Cargo loading / unloading of ship, STW 150, Vapour Line

Italy

DAC-V 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading

Hose Reel with hydraulic rewind system blue, TW 100, DDC-M 100

Fuel delivery at the petrol station

LTW 75 fuel delivery hose, GPS 50 vapour balance hose

PHD-F aircraft refuelling hose

PHD 63 F

DG 50 Al - new Aluminium swivel for ZVF 50

Section view

Production MannTek, Sweden

AMB 50 SS

'Camlock' stainless steel dust cap to EN 14420 - 7 for male adapters AVK with captive seal

Fluorline EFL 21

Universal pump hose DN 21 for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents. Ideal for highly sensitive media such as AdBlue^® urea solution. Temperature range - 40° to + 100° C. Burst pressure > 64 bar.

Universal hose assembly UTS 50 with SFC 50 SS / SS

Hose assembly for L.P. Gas

LPG 50, DGC-M 50

Check Valve 350 bar

for Hydrogen

Oasis SV104 Sandwich Valve with Air Torque Actuator, for CNG

FGN 2 St

Flange with male thread, steel zinc plated/chromated

TWO 100

TW coupling seal for Tank truck couplings DN 100 to EN 14420-6. NBR black.

Anti-Kinking Spiral 'KSS'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the new Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

KR 50 - 21/2"

Filling of Heating Oil Tanks: New Adapter for difficult-to-reach house connectors

SMX 50-2"

Female hose coupling of steel with Spannfix clamps

ROTEX 200.10 SS TAS

Rubber Expansion Joint with PTFE lining and PTFE vakuum support ring