Media Library / Images

Underwing refuelling, HD-C

Aircraft dispenser, pit

VK 50 SSE

TW male adapter. Material: stainless steel with universally resistant PFA coating (red)

ERV-G 100.16

YELLOW BAND Rubber Expansion Joint suitable for petroleum based products with aromatic content up to 50%, fuels (ethanol content up to 85 %), aviation fuels, town gas and natural gas except liquefied petroleum gas. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

Hose assemblies for petroleum based procucts

LTW 75, VX 80-3, MannTek DDC-M80-3Ms & TW 63, SFX 63 TW

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

Bunkering ship: FHD hose assemblies

oasis TH Tank Head Valves, CNG trailer

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

ELAFLEX Hamburg

Assembling ERV small DN

ELAFLEX Hamburg

Assembling Spannfix hose clamps

GasGuard LPG nozzle GG1E

eoconomic type for industrial refueling / attended refueling. Release volume on valve closure: 1,9 cm³.

ERV VSD:

ERV with vacuum support spiral. Spiral of AISI 316 Ti, used when the vacuum resistance of the chosen ERV is not sufficient.

Oasis NGV / CNG Refuelling Equipment

PAL hoses for the chemical industry

HD 50 C, HD 10 C

Yellow band aircraft refuelling hose and sensing hose

Unloading chemical road tanker

Tecnopal hose assembly, DDC Dry Disconnect Coupling, Guillemin adapter

ZVG 2 ACME nozzle for L.P. Gas / Autogas, LPG 16 hose assembly, ARK 19 Safety Break

SBS 250 - marine cargo hoses with built-in nipples

EN 1765, category S 15

UTS hose assembly with AMKC 32 SS and AVKC 32 SS

'Camlock' stainless steel female and male coupling to EN 14420 - 7 with hose tail and Spannloc clamps

KSS-SD of stainless steel

for saturated steam hoses. These hose assemblies are subject to high wear. The main stress area for hose assemblies is also at the joint end is protected.

SC 50 SS

Spannloc clamps, stainless steel

SG 1" 1x0 Al

Sight Glass, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

LNG Refuelling

Remove N-LNG Nozzle

Dust caps and plugs for MannTek Dry Disconnect Couplings

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

ZVG 2 EURO UL

L.P.Gas nozzle for Autogas refuelling with propane, butane and their mixtures - with "EURO" connector; UL listed.

Tank storage: manifold with DDC Dry Disconnect Couplings, TW hose assemblies

Hose assemblies

with flanged coupling, Dry Disconnect Coupling, TW coupling

ZVF 50 JET overwing refuelling

with HD-C hose assembly

IBC Adapter RS S60x2 SS