Media Library / Images

Rubber Expansion Joint ERV-BR 80.16

BR Expansion Joints, special type for abrasive media such as sludges, slurries, solid / liquid mixtures and emulsions, dustlike or powdery products (e. g. carbon-blacks). Also suitable for all kinds of water (non oil containing) as well as various chemicals. Not suitable for petroleum based products. For extreme strain (e.g. sharp and rough-edged matter) we suggest the use of ERV with inner protection sleeve type SR

MK 80 Ms

TW coupler of brass, to EN 144260-6 with 3" female BSP connection

ZVA Slimline 2 and ZVA Slimline 2 GR, special colour light green

Unloading petroleum products at the service station (road tanker to UST)

LTW hose assembly, MK 80-32° Ms couplers with bent lever. The lever shall always be fully closed for safety reasons. For applications with limited room.

IBC unloading

Coupling of Chemopal chemical hose assembly with AMKC 50 SS (Camlock female with Spannloc attachment) to AMKI male coupling. Use of IBC-adapter RS 60 x 2 SS.

ERV-CR

"CR" Rubber Expansion Joints - installation in sewage plant

ELAFLEX Hamburg

Assembling cell dispensing hoses

CNG Safety Break

SB-CNG FLVL-S

DGC-V 50 F SS for L.P. Gas, PN 25/40

Dry Disconnect Coupling with flange connection, DN 50, stainless steel, with rubber dust cap

MK-A 80 SS

MK 80 SS with active safeguard lever

ZVF 25 for aircraft refuelling

dust cap and ground cable assembly

ERV-R

"Red Band" Rubber Expansion Joints; wastewater pump

Hose Trolley for terminal operations (bunkering, cargo and refinery)

Hose Trolley HTR-T

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings; Use of adapters with ACME thread

Trailer Inline Safety Breaks

IB108

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

ERV-G 100.16

YELLOW BAND Rubber Expansion Joint suitable for petroleum based products with aromatic content up to 50%, fuels (ethanol content up to 85 %), aviation fuels, town gas and natural gas except liquefied petroleum gas. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

MC 38-11/2" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

VX 63 2½" SS NR Al

Hose coupling with male thread, Spannloc aus Aluminium

ZVF 50 helicopter refuelling with HD-C hose assembly

France

DDC-V 50 SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with BSP thread connection

PHD-F aircraft refuelling hose

PHD 63 F

ContiTech Production ERV

Vulcanisation

Oval flange seal FD 650-3 of ELAPAC 3 mm

Unloading chemical road tanker

Tecnopal hose assembly, DDC Dry Disconnect Coupling, Guillemin adapter

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

ELAFIX 40

Magnet adapter for installation in filler necks from DN 40. This adapter allows the refilling of urea solution with ZVA AdBlue HV, without the risk of misfillings. Meets ISO 22241-4.

ZV 500, hand

High performance manual operated dispensing nozzle with 'TW' coupling MK 50 for Diesel, fuel, oils, petroleum

ERV with black, conductive PTFE lining 'TA OHM'

Hose Safety Break for LPG

ARK 19