Media Library / Images

Unloading petroleum products at the service station (road tanker to UST)

LG hose assembly for gravity discharge

SG 1" 1x0 Al

Sight Glass with propeller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Rubber Expansion Joint ERV-CR 80.16

CR Expansion Joints for cold and warm water, swimming pool water, sea water, waste water (weakly sour or alkaline) also oil containing, cooling water with protective oils against corrosion, lubricating oil, grease and air, compressed air. Temperature range (depending on medium) - 25° C up to + 90° C, temporarily up to + 100° C. Electrically non-conductive.

LPG Autogas dispenser

ZVG 2 ACME + ZVG 2 DISH nozzle, LPG 16 hose, ARK 19 Safety Break

Slimline 21 red

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ZVA Slimline 2 and ZVA Slimline 2 GR

Dispenser, Czech Republic

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ZVA Slimline 2, dispenser

Coloured hose assemblies for the forecourt

Slimline 21, M 21-1" NR

ZVA 32 for aircraft refuelling

black plastic cover (scuffguard), Sight Glass, dust cap and ground cable assembly

ERV Rubber Expansion Joints

Picture 3

ELAFLEX Hamburg

Main building / entrance

ZVA Slimline 2 nozzles special version, Slimline dispensing hoses blue / red

Thailand

Oasis SV108_SV104 Sandwich Valves with handle, for CNG

ZVA Slimline 2

with Sight Glass

Slimline 16 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

DDC-V 50 SS F

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with flange connection

ZVF 50 UL 91 / green

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

ERV-ROTEX expansion joint, inhouse emergency power generator

Dantec Production hose

Composite hoses: crimping of a flanged hose coupling

Hot bitumen hose - loading (bunkering) ship

HB 100 hose assembly

L.P. Gas rail tanker

loading and unloading with DGC Dry Gas Couplings, LPG hose assemblies. Vehicle side: DGC-V male couplings with flange

TGN 4" Al tank truck flange with threaded nipple, VK 100 Ms male TW coupler, MB 100 Al dust cap, chain

DAC, Airport Depot

Dry Aircraft Coupling ISO 45 with HD-C hoses for bottom loading of aircraft refuellers at airport depot

Boat refuelling: ZVA Slimline 2

Netherlands

LPG terminal: loading with DGC Dry Gas Couplings

BK 3 Ms

Cap with 3" female BSP thread, brass

Equipment truck for dangerous goods accidents, Elaflon PTFE universal hose assembly, DDC Dry Disconnect Coupling

ERV-G 50x160

Fuel mixer / blender

Yellow Band hoses from Elaflex

Setting the standard for refuelling hoses