Media Library / Images

ZVG 2 K (Korea)

front view

UTS hose assembly with AMKC 25 SS/SS

'Camlock' stainless steel coupler to EN 14420 - 7 with hose tail and Spannloc stainless steel clamps

Slimline SF 19 black

Quality petrol pump hose for gasoline and diesel fuels. Special type 'sulphur-free'. Sulphur content of fuel does not increase, even if medium remains with the hose for a longer time, see Information 12. 15 and catalogue page 111c.

ZVA Slimline 2 DSA

DSA: Pressure Controlled Safety Shut-Off

ERV-GR Green Band rubber expansion joint, Biogas entergy plant

coupled PTFE hose assemblies, MK 50 SS, Adapter VK 50 SS x VK 50 SS, Spannloc stainless steel clamps

Fluorflex FXD universal hose assemblies

with inner corrugation for maximal flexibility. Picture 1

Dispenser picture to distinguish the three different kinds of Safety Breaks

Hose Break, Pump Break, Nozzle Break

ZVA Slimline 2 with reduced spout and Slimline hose

here: for gasoline, use in countries without vapour recovery regulation

Marine bunkering and cargo hoses

offshore supply

ZVA Slimline 2, black - bottom view

ZVA HV for AdBlue®, SSB 16 SS, SL 16 for AdBlue®, Elafix 40

Urea solution (DEF, ARLA 32) for trucks: nozzle, Safety Break, hose assembly and adapter for the vehicle AdBlue^® filler inlet to avoid misfuellings.

ZVA Slimline 2 GRVP, Coax hose assembly

With integrated vapour insert EK 096. For dispensers with single fi lling point or dispensers with integrated 'On / Off ' valve. The vapour return rate is regulated within the dispenser.

Ship loading various media - STW 150 and UTS 150 hose assemblies

ZVA Slimline 2 GR, black, guard 3 - side view

ERV SR:

ERV with inner protection sleeve of stainless steel AISI 316 Ti to prevent abrasion of the rubber liner, i. e. for media containing abrasive components or to avoid cavitation. Please note : The nominal bore is reduced.

GasGuard LPG nozzle GG30

4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

ContiTech Production ERV

manufacturing the blank

Slimline quality dispensing hose for the forecourt

Elapharm EPH 25 OHM-G

ELAPHARM OHM G electrically conductive 'Ω / T', light grey cover. Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform. Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.

Easy Rotating Safety Swivel Break, Type 'ERS'

SSB 16 ERS

ZVF 50 JET overwing refuelling

LeverAssist hold-open aid for comfortable refuelling

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Dantec Production hose

Composite hoses: hose with customer braning, application of outer helix

SPANNFIX pinned safety clamps of aluminium

SX 50 NR Al

DAC-V 65, DAC-M 65

Coupling test facility

MB 80 SSE

TW dust cap of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Polypal Plus 50 universal hose

with seamless, black, conductive UPE lining. For almost all liquid and pasty chemical and petroleum based products and solvents. Meets EN 12115.

ZVA Slimline 2 GR nozzle

with Coax hose assembly (one side open end, inner vapour hose visible)

TW coupler MK 80 SS-90° (bent lever) and dust plug VB 80 ADR SS with pressure relief