Media Library / Images

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

ZVA Slimline 2, guard no. 4, Sight Glass SG 1 Al, Slimline hose assembly

FGN 2 SS

Flange with male thread, stainless steel

Lightweight Gravity Discharge Road Tanker Hose LG 3"

with VX 75-3" Al LG

Hose Reels group picture

Movable, pneumatic rewind system, active Vapour Recovery (VR) for gasoline fuels

AMK 25 EASY

EASYLOC ('Camlock' stainless steel coupler to EN 14420 – 7 for male adapters AVK with captive seal) with lever arrest

Construction site / on site refuelling:

ZVA 32 (automatic nozzle), road tanker

CNG Safety Break (Hose Break)

separated

Unloading petroleum products at the service station (road tanker to UST)

LG hose assembly for gravity discharge

Graphic Drip Stop spout for ZVA Slimline 2 nozzles

From Terminal To Nozzle

Elaflex refuelling equipment

Road tanker reel with HD 50 hose assembly, ZV 500 nozzle

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

RM-St 50 SSE

Female foodstuff threaded hose tail for assembling with Spannfix or Spannloc. Material: stainless steel with universally resistant PFA coating (red)

ERV-BR 100.16

BR Rubber Expansion Joint, special type for abrasive media such as sludges, slurries, solid / liquid mixtures and emulsions, dustlike or powdery products. Also suitable for all kinds of water (non oil containing) as well as various chemicals. Not suitable for petroleum based products. For extreme strain (e. g. sharp and rough-edged matter) we suggest the use of ERV with inner protection sleeve type SR.

ELAPHARM Type EPH 25

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Production Picture 3

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Swivel EA 075 A f. ZVA HV for AdBlue®

new design

Urea solution for trucks: ELAFIX 40 magnet adapter in filler inlet of AdBlue® tank

Safety against misfuelling (mixup with Diesel)

GasGuard LPG nozzle GG30

LPGas nozzle with Bayonet connection according to EN 12806 - 2003 for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane. New : 4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

ELAFLEX Hamburg

ELAFLEX stock

Pipe with AVKI 50 SS, hose assembly with AVKX 50 SS, lever movement

'Camlock' stainless steel female and male coupling to EN 14420 - 7

Slimline 19 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

ZVA Slimline 2 GR, SG-COAX, ZVA SLimline 2, SG 1" Al

Multi Product Dispenser with / without vapour recovery; nozzles with Sight Glass

ZVA 32 for aircraft refuelling

black plastic cover (scuffguard), Sight Glass, dust cap and ground cable assembly

Cargo loading of a tanker with petroleum based products; FHD hose assembly

Picture courtesy of Macoil International, Gibraltar

CNG Safety Break with Extention 'EL' (Extended Length) SB-CNG FLVL-EL-J

 SB-CNG FLVL-EL-J

ERV-W 80.16 ZS 2

White Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

PSB Pump Safety Break for High Hose Dispensers

Picture shows separation of the Slimline hose assembly after a drive-off accident