Media Library / Images

Marine bunkering and cargo hoses

ship to shore bunkering

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

ELAFLEX Hamburg

ERV inner protection sleeve/tube "SR"

ERV-W 80.16 ZS 2

White Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

Ship bunkering

Taking probes; VK coupling

UTS 200 hose assembly in chemical plant

Italy

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

ERV-ROTEX expansion joint, inhouse emergency power generator

TW filll adapters:

TWV 7 (VK 50 x MB 80), TWÜ 13 (VK 50 x 21/2" fem.)

Adapters / couplers for vehicles fighting dangerous goods incidents:

"TW" Plugs and Caps MB 50 SS/Vi, VB 50 SS, VB 100 SS, BK 2" SS/Vi, BK 3" SS/Vi

Unloading LNG road tanker

DCC Dry Cryogenic Coupling

Lightweight Gravity Discharge Road Tanker Hose LG 4"

with TW couplings

Ultra Fast Fill Quick Coupler 350 bar

for Hydrogen

Oasis FV103 with NC203 P30, Light Duty Fill Valve and Transit Nozzle for CNG

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Contour check

MB 80 SSE

TW dust cap of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

FSH flame protection cover for ERV rubber expansion joints

Use e.g. in ship engine rooms

FGN 3" SS

Flange with male thread, stainless steel

Production plastic parts

Injection Molding

HD-C LT, Low Temperature

LT (Low Temperature) types of our aircraft refuelling hoses are suitable for use in especially cold regions - high flexibility.

Oasis DMI Dispenser Manifold for CNG

ZVF 25 with EKG and GKG

Manual nozzle DN 25 for aircraft overwing refuelling, with ground cable assembly, dust cap assembly. NEW: free of non-ferrous metals to JIG rules. Note: yellow chrome plating on swivel is 'free or non-ferrous metal'.

ContiTech Production hose

Dispensing hose, removal of mandrel

ERV-G 100 TW

Rail tanker unloading of petroleum based products

Plant side: FWS PP St/St composite hoses, SG 3" Sight Glasses

HD 50 reel hose for petroleum based products, VC 50-2" Spannloc clamped male coupling

Urea solution filling of a car: ZVA AdBlue LV

Quality in the detail: valve assembly of a ZVA Slimline 2 petrol station nozzle

KSS-SD of stainless steel

for saturated steam hoses. These hose assemblies are subject to high wear. The main stress area for hose assemblies is also at the joint end is protected.