Media Library / Images

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Manufacturing of turned parts

LNG Refuelling

N-LNG Nozzle, Soft-Stop-Position

Hot stamping process, TW coupling part

ELAFLEX Hamburg

Hose stock

ZVG 2 DISH

Nozzle for L.P. Gas / Autogas, with 'Italian' Claw Coupling. Pictured: coupling open / closed

GasGuard LPG nozzle GG20DN

With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.

Oasis manifold, ball valves - Biogas

HD 100 C, hydrant hose

Aircraft dispenser, pit

AMX 50 PA

Ammoniac hose to EN ISO 5771 for water-free, liquid and gaseous ammonia.

LBS 50 foodstuff hose, RMC 50 SS foodstuff fitting with Spannloc of stainless steel

Aseptic bulk filling

Bunkering ship: FHD hose assemblies

Sight Glasses for petrol station nozzles

SG 1" Al, SG-COAX, special types with Propeller

TW coupler MK 80 SS-90° (bent lever) and dust plug VB 80 ADR SS with pressure relief

COAX Safety Break NR

CSB 21 NR

ERV-GR ... ZS

"Green Band" Rubber Expansion Joints with limiters in chemical pumping system

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

L.P.Gas home delivery:

LPG 38 hose assembly - Aboveground storage Tank

MannTek Dry Disconnect Couplings:

DDC-V 50-2", DDC-V 50 F, DDC-M 50-2", DDC-M 80-3"

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, road tanker

ELAFLEX Hamburg

Assembling dispensing hose: marking

ZVG 2 K (Korea)

suitable for passenger and heavy duty vehicle refuelling in markets utilising the 'J15' fill point receptacle.

Slimline hose assembly, section view

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

Flame resistance test hose

Unloading petroleum products at the service station (road tanker to UST)

LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

V 16-3/4"

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, yellow.

Slimline 19 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

FWS 50 PTFE

Composite hose with PTFE lining

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, blue.