Media Library / Images

ERV Rubber Expansion Joints

Picture 4

ZVF 50 JET overwing refuelling

with HD-C hose assembly

ElaSil® Silicone hose assemblies DN 13-102

For for high media purity requirements, easy to clean. Suitable for Pharma, foodstuff and cosmetics industry. Homogeneous hose construction of platinum cured, translucent and phtalate free Silicone (FDA / USP), resistant to kinking and highly flexible. Large temperature range -60° C to +200° C. Available as complete hose assembly with crimped fittings, DN 13 to 102. Here: DN 25 with Camlock Cam Locking Coupling and Triclamp connection

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

ContiTech Production ERV

Long term elongation / compression testing

Cabinet of road tanker:

MK 80 with VB 80 ADR SS (plug with pressure relief)

ERV-GR ... ZS

"Green Band" Rubber Expansion Joints with limiters in chemical pumping system

DDC-K ADR:

DDC Dust Caps with Pressure Relief Valve to ADR Requirements. These pressurized dust caps PN 10 of aluminium for DDC male adapters on road tankers are much lighter than the PN 25 versions of stainless steel.

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure 10 bar (140 psi). Temperature range -40° C up to +55° C

CHD 32

Lilac Band chemical hose without helix, DN 32

Oasis BV701 Ball Valve, with air torque actuator AT101, for CNG

Rail tanker unloading of petroleum based products

LTW hose assemblies; Poland

Hose assembly TW 63 with SFX 63

TW hose with helix, 'TW' flange with hose tail and Spannfix clamps of aluminium

Vehicle refuelling with LPG (L.P. Gas, Autogas, Propane)

GasGuard GG1 ACME nozzle

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ERV-G

with vacuum support spiral

ContiTech Production ERV

Test Rig 15° 20.000 cycles

VK 80 - 2" IG Ms

TW male coupling brass, with reduced female BSP connection, one piece adapter (special type)

Oasis FV103 Fill Valve, NC 104 Nozzle Coupler, CNG bus refuelling of small truck

ELAFLEX Hamburg

ELAFLEX stock hoses

H2 Cover Hose 'CH-H2 38'

Safety Break Thread

VB 100 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ZVA Slimline 2 and ZVA Slimline 2 GR with sight glasses, Slimline hose assemblies

Petrol station, Czech Republic

ROTEX Rubber Expansion Joints

Biomass powerplant

Vehicle refuelling Korea with LPG (L.P. Gas, Autogas, Propane)

ZVG 2 K nozzle, LPG 16 hose assembly

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Sample inspection

Construction site / on site refuelling:

ZVA 500 manual bulk nozzle (shut off by limit switch), HD hose assembly, road tanker

Transport protection for threaded fittings

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly, bonding cable