Media Library / Images

VB 100 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

LNG bunkering

Transfer system

ELAFLEX refuelling equipment:

Quality is in the detail.

Oasis FV103 45° Fill Valve with NC 203 P36 Nozzle, for CNG

Quick Tester GR 92

for the simple Yes / No functioning test of vapour recovery

ZVG 2 K (Korea)

with EA 866 scuffguard / nozzle talker

PAL hoses for the chemical industry

Flame resistance test hose

ELAPHARM Type EPH-OHM G

electrically conductive 'OHM/T', with light grey cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, black PTFE liner.

ERV-G ... TW

Aircraft refueller

SG 80-TW1 Al

Sight glass with rods, with TW flanges to DIN 28460

MannTek DGC-M & DGC-V DryGasCouplings

the alternative to ACME and flanged connections

AN 2 St

Welding nipple steel

ELAFLEX Hamburg

Construction

ZVA Slimline 2 GR, Coax hose assembly

Automatic nozzle with vapour recovery, flowrate up to 45 l / min.

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Sand casting

Slimline 16 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 EURO

ELAFLEX Hamburg

Coax hose assembling

ERV-R 80.16 SS TA

Red Band Rubber Expansion Joint with "TA" PTFE lining

Slimline 21 hose assembly with non reattacheable female coupling M 21-1" NR

ZVA 25 for AVGAS

red scuffguard, AVGAS sticker; Slimline hose assembly

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Drum unloading; UTS 32 hose assembly

ZVG 2 K (Korea)

suitable for passenger and heavy duty vehicle refuelling in markets utilising the 'J15' fill point receptacle.

Camlock Cam Locking hose tail AMK-St 50 Ms (brass)

for the assembling with Spannfix or Spannloc clamps

ELAFLEX refuelling equipment:

Quality is in the detail.

ZVA Slimline 2 GR nozzle

with Coax hose assembly (one side open end, inner vapour hose visible)

Marine bunkering and cargo hoses

ship to ship bunkering

Oasis FV103 Fill Valve with extension, CNG dispenser