Media Library / Images

MannTek DGC DryGasCouplings for L.P. Gas

DGC-M 50-2" with DDC-S dust plug

Elaflex refuelling equipment:

Quality is in the detail.

Production plastic precision parts

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

ELAFLEX Hamburg

ELAFLEX Hamburg, large new narrow aisle stock 2018 for hoses

Drum unloading chemical industry

UTS hose assemblies with Easyloc cam locking couplings

VX 38-11/2" SS

Spannfix male hose coupling, stainless steel

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Contour check

Unloading petroleum products at the service station (road tanker to UST)

LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

ZV 400, HD hose assembly on road tanker

IBC loading and unloading

MannTek DDC-M 50, FWS 50 PTFE

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

ZVA LV for AdBlue® with EA 075 LV

Urea solution (DEF, ARLA 32) for Light Vehicles

Heating oil delivery: ZV 400 nozzle, HD reel hose

Cabinet of road tanker:

MK 80 with VB 80 ADR SS (plug with pressure relief)

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose

ZVA Slimline 2

Dantec Production hose

Composite hoses: crimping of a flanged hose coupling

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, red.

ELAFLEX refuelling equipment:

Quality is in the detail.

FFBV 80, DAC-V 65, DAC-K 2 1/2" Al

MannTek Full Flow Ballvalves (FFBV), one way

Lube oil plant: manifold with DDC-V Dry Disconnect Couplings

Alternative fuels: HVO (hydrotreated vegetable oil) and E 85 (gasoline with up to 85% ethanol)

ZVA Slimline 2, ZVA Slimline 2 GR

ZVA Slimline 2, dispenser

Estonia

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

Oasis 1/2" Ball Valve for CNG

Heating oil delivery: HD 38 reel hose

Hose assemblies and Rubber Expansion Joints for the chemical industry

ERV-GR TA, UTL with DDC, FXD with male thread, Elaflon Plus FEP with foodstuff fitting, Elaflon PTFE with female thrad

ERV VSR:

ERV with vacuum support ring. Ring of AISI 316 Ti , used when the vacuum resistance of the chosen ERV is not sufficient.