Media Library / Images

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 DISH nozzle, LPG 16 hose assembly, ARK 19 Safety Break

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

ELAFLEX Hamburg

ELAFLEX stock hoses

ERV-W 80.16

WHITE BAND Rubber Expansion Joint for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

ElaSil ELS 38 with DIN 11851 hose fitting, FREE OF DEAD SPACES

DDC-M 65-2 1/2" Al

MannTek Dry Disconnect Coupling, aluminium

Sideway storage of hose assemblies, tank truck for petrol station delivery

LG 3" hose assembly for gravity discharge, LG 2" hose assembly for vapour balance

Cabinet of road tanker:

hose tubes, TW hoses, TW couplings

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Underwing refuelling

Biofuel

Type PCS 38 (Polypal Clean DN 38 mm)

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, depot

Oasis FV103 Fill Valve, NC 104 Nozzle Coupler, CNG bus refuelling

Dispenser at the airport

ZVA 25 Avgas for overwing refuelling

Solvapal 32

Solvent hose to EN 12115 for most solvents, paints (also waterbased), water laquer, petroleum products, alcohols, alede hydes, esters and ketones. In short term operation also suitable for aromatic und chlorinated hydrocarbons.

Ship cargo loading with FWS-PP composite hoses

ERV-GR ... ZS

"Green Band" Rubber Expansion Joints with limiters in chemical pumping system

Hose assembly for L.P. Gas

LPG 50, DGC-M 50 with special handle, adapter DGC 50 x 3 1/4" ACME

Production plastic parts

Injection Molding

Road tanker hose assembly

with VKC 75 SS (TW male coupling stainless steel, one part, with Spannloc clamps, K-Ring), dust cap VB 80 SS & chain

Yellow band aircraft refuelling hose, hose coupling with male thread, Spannloc aus Aluminium

HD 50 C, VC 50 SS, SC 50 Al

Urea solution filling, truck: ZVA HV for AdBlue® nozzle

ZVA Slimline 2 / ZVA Slimline 2 GR

Petrol station nozzles with and without vapour recovery, hose assemblies

Oasis HC308 Ultra Fast Quick Fill Coupler for CNG

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Anti-Kinking Spiral 'KSS'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the new Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

Rubber Expansion Joint ERV-OR 80.25

ORANGE BAND expansion joints for Liquid Petroleum Gas (LPG) to EN 589. For tank trucks and refuelling stations. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically dissipative.

Tecnopal 38

Chemical hose to EN 12115 for alkalis, acids, solutions, alcohols, polar solvents, acetates, aldehydes, esters, ketones, hot water, hot air (not oily).

Polypal Oil 75

Universal chemical hose special type with petroleum resistant cover of Chloroprene (CR). Suitable e.g. as gantry hose (road tanker loading).

LBS 50 hose for foodstuffs, FDA conform