Media Library / Images

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

L.P.Gas petrolstation, GG20, Slimline, ZVG 2 EURO UL

ZVA Slimline 2

with Sight Glass

ELAFLEX Hamburg

Aerial view (left to right): Technical dept., small aisle stock, stock with loading ramps

Offset UST filling point, LTW hose assemblies with TW couplings

ERV SR:

ERV with inner protection sleeve of stainless steel AISI 316 Ti to prevent abrasion of the rubber liner, i. e. for media containing abrasive components or to avoid cavitation. Please note : The nominal bore is reduced.

ZVA Slimline 2 and ZVA Slimline 2 GR, special colour light green

MK 80-3" AG Ms

TW coupler of brass, to EN 144260-6. Special type with 3" male BSP connection

ZVA Slimline 2 GR, guard 3, red, Coax hose assembly with Colour Sleeve red

FGN 2 SS

Flange with male thread, stainless steel

ERV-CR

"CR" Rubber Expansion Joints - installation in sewage plant

Alternative fuels: HVO (hydrotreated vegetable oil) and E 85 (gasoline with up to 85% ethanol)

ZVA Slimline 2, ZVA Slimline 2 GR

SPANNFIX pinned safety clamps of stainless steel

SX 75 NR SS

Oasis DMI Dispenser Manifold for CNG

Solvapal hose assemblies

Solvents

Elaflex Pacific (Australia)

Manufacturing GasGuard GG1 nozzle

Wear Advice

VHD 50

ELAFLEX Hamburg

Aerial view over the ELAFLEX premises

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

KR 50

bend with VK 50 x MK 50, 60°

ARK 19 Safety Break including BS 19 Break Sleeve

Safety Break (Hose Break) for installation to LPG Autogas dispensers. Reassembly on site without tools

Slimline 21 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ZVA 25 for aircraft refuelling

red plastic cover (scuffguard), decal (sticker) AVGAS, dust cap and ground cable assembly

ZVA Slimline 2

with Sight Glass

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Sand casting

Adapters / couplers for vehicles fighting dangerous goods incidents:

Adapter Rail Tanker Dischharge Coupling KWK SS/Vi x VK 50 SS/Vi

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Elaflon Plus FEP hose assembly with KSS anti kinking sleeve

flange hose fitting with special coating

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, blue.

Adapters / couplers for vehicles fighting dangerous goods incidents:

Adapter for Rail Tanker 51/2" connection KWZ SS/Vi x VK 50 SS/Vi