Media Library / Images

M 63 2½" SS, TD 76/63 PTFE, Spannloc SC 63 Al

Hose coupling with female thread, Spannloc aus Aluminium

Unloading petroleum products at the service station (road tanker to UST)

MK 80-32° coupling with bent lever. For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 DISH nozzle

Manifold for filling chemical tanktrucks

UTS hose assemblies

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Hose assemblies

Universal hose UTS 50 with DDC-M 50-2"; Tanker hose for petroleum based products LTW 75 with DDC-M 80-3"

GW-G, FGN 4" SS, RS 4" x 3" SS, MK 80 SS

f. fire brigade dangerous goods equipment trucks

ARK 19 Safety Break (Hose Break) at LPG Autogas dispenser

Reassembly on site without tools

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ZVG 2 ACME nozzle for L.P. Gas / Autogas

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

ELAFLEX Hamburg

TGN 2" Al (TGN 50 Al)

Tank truck flange aluminium, one end flange to DIN 28462, other end male BSP thread.

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: before release

RMX 32 SS / SS

Spannloc threaded hose coupling with foodstuff thread / Spannloc of stainless steel

ELAFLEX Hamburg

Nozzle stock, ZVA Slimline 2 GR

Slimline quality dispensing hose for the forecourt

Terminal Railtanker

LTW 100, MK 100, VK 100, SBC 100-4, FFBV 100

Aircraft refuelling: MannTek sampling unit in hydrant system

ELAFLEX Hamburg

Narrow aisle stock fittings

Filling of Heating Oil Tanks: Adapter KR 50-21/2"

for difficult to reach filler inlets

MannTek DCC-V & DCC-M Dry Cryogenic Couplings

Camlock cam locking couplings

top left – ELAFLEX standard version; bottom right – ELAFLEX EASYLOC version

ELAFLEX Hamburg

ERV, assembling vacuum support spiral VSD

Rubber Expansion Joint ERV-CR 80.16

CR Expansion Joints for cold and warm water, swimming pool water, sea water, waste water (weakly sour or alkaline) also oil containing, cooling water with protective oils against corrosion, lubricating oil, grease and air, compressed air. Temperature range (depending on medium) - 25° C up to + 90° C, temporarily up to + 100° C. Electrically non-conductive.

ZVA Slimline 2 GR

Automatic nozzle with vapour recovery, flowrate up to 45 l / min.

Dispenser at the airport

ZVA 25 Avgas for overwing refuelling

HD-C, underwing nozzle

Aircraft refueller, large reel with aircraft refuelling hose and underwing nozzle

ZVA Slimline 2 GR

blue scuffguard, blue produc sleeve, guard no. 4

ZVA Slimline 2, guard no. 4, Sight Glass SG 1 Al, Slimline hose assembly

Equipment for vehicles fighting dangerous goods incidents:

PTFE 50 Universal hose assemblies - with TW couplings of stainless steel