Media Library / Images

ElaSil® Silicone hose

ZVA Slimline 2 nozzle, yellow

Oasis HC308 Ultra Fast Quick Fill Coupler, SAE male, for CNG

Camlock Cam Locking hose tails AMK-St 50 Ms and AVK-St 50 Ms (brass)

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

RS 1 x 11/4 SS

Reducer Female/Male

ZVA Slimline 2 nozzles special version, Slimline dispensing hoses blue / red

Thailand

SG-COAX_Al

Sight Glass, to EN 13617-1, for ZVA Slimline 2 GR with vapour recovery. Installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised fuels.

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: before release

Adapter: MK 80-32° Ms x MK 80-32° Ms

Special type with bent levers. The lever is bent to enable lever arrest (safe position when coupled)

Urea solution filling of a car: ZVA LV for AdBlue®

EK 145 Product Badges for ZVA nozzles

HB 19 ST tar spraying hose

ELAFLEX Hamburg

Aerial view (left to right): Technical dept., small aisle stock, stock with loading ramps

HB hot bitumen hose - loading road tanker

Adapter / Safety Breakaway Coupling for rail tanker loading / unloading

SBC 100 Safety Breakaway Coupling with RV-KW 51/2", RV-VK 80

ERV SR:

ERV with inner protection sleeve of stainless steel AISI 316 Ti to prevent abrasion of the rubber liner, i. e. for media containing abrasive components or to avoid cavitation. Please note : The nominal bore is reduced.

ZVF 50 UL91 overwing refuelling

UL 91: new unleaded aviation fuel - identification colour green

Oasis Engineering Ltd, New Zealand (CNG refuelling products)

Production Picture 22

Example of a marking of test data (hydrostatic test) of a hose assembly

GasGuard LPG nozzles

and LPG 16 hose assemblies for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane.

PSB Pump Safety Break for High Hose Dispensers

Picture shows separation of the Slimline hose assembly after a drive-off accident

Ultra Fast Fill Quick Coupler 350 bar

for Hydrogen

KWZ x VK 80

Rail car adapter with TW male coupling

SG 1" 1x0 Al

Sight Glass, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

LBS 75 hose assembly for foodstuffs, FDA conform

with VC 50 SS male coupling, Spannloc clamps

Connection aircraft refueller to flanged hose assembly

ERV-G 100 TW, HD 100 C, TW-flange

Equipment truck for dangerous goods accidents, Elaflon PTFE universal hose assembly, DDC Dry Disconnect Coupling

Hot stamping process, TW coupling part

Alternative fuels: B 20 (Diesel with up to 20% Biodiesel), E 85 (Gasoline with up to 85% Ethanol)

ZVA Slimline 2, ZVA Slimline 2 GR