Media Library / Images

V 19-1"

Male ferrule hose coupling EN 14424, reusable. Slimline 19 hose, black.

Vehicle refuelling with LPG (L.P. Gas, Autogas, Propane)

GasGuard GG1 ACME nozzle

TW coupler MK 80 SS-90° (bent lever) and dust plug VB 80 ADR SS with pressure relief

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

Ship bunkering

'Yellow Band' collapsible high 

Composite hose Danoil 7GG, DDC-M Dry Disconnect Coupling, airport depot

Cabinet of road tanker:

MK 80-32 TW coupler with bent lever, VB 80 P dust plug

LNG Refuelling

N-LNG Nozzle, pull back handles to uncouple

Construction site / on site refuelling:

ZVA 500 manual bulk nozzle (shut off by limit switch), HD hose assembly, road tanker

ZV 500 DDC, ZVA 32 DDC, hose assembly with DDC-M coupling

Refuelling of construction site machines from the road tanker: only one hose reel, choose between two nozzles (ZV 500 for bulk, ZVA 32 automatic nozzle up to 200 l/min)

RS 21/2 x3 SS

Reducer Female/Male

LNG Refuelling

LNG Nozzle 'N-LNG'

Hose Reel f. marina terminal, Manual Rewind

TW hose assembly

HB 19 ST tar spraying hose

Pressure hose for road construction machines, especially for hot bitumen and heavy heating oil. Temperature range: - 25° C up to + 220° C. Meets EN 13482, Type 2 SB/B (DN 19 and DN 32 analogue).

Hot bitumen hose - loading (bunkering) ship

HB 100 hose assembly

LMD 25 Blue Band solvent hose

without helix

Fluorline EFL 16

Universal pump hose DN 16 for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents. Ideal for highly sensitive media such as AdBlue^® urea solution. Temperature range -40 °C to +100 °C. Burst pressure > 64 bar.

ElaSil® Silicone hose assemblies

Connecting Triclamp

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ERV-OR ... ZS

"Orange Band" Rubber Expansion Joints with limiters; heating plant

ERV-G 150 TW, ERV-G 100 TW, ERV-G 80 TW

Hose assemblies for petroleum based products

Yellow Band quality with nozzle, TW coupling, flange connection

For long and heavy aviation refuelling hoses: Hose Beads 'BD' to EI 1522 standard

They notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

HD 10 C sensing hose

ERV-G 150.TW, ERV-G 80.TW

Aircraft refueller

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Assembling ZVA

Ship bunkering with LNG

Coupling of DCC male and female part DN 50; left hand side CBC 50 Cryogenic Breakaway Coupling

ERV-G

Pump-tank connection; lateral offset

MannTek Safety Breakaway Coupling SBC 80 SS

with female thread BSP connection

UTS hose assembly with AMKC 25 SS/SS

'Camlock' stainless steel coupler to EN 14420 - 7 with hose tail and Spannloc stainless steel clamps