Media Library / Images

ELAFLEX Hamburg

Construction

LNG Refuelling

LNG Safety Break SB-LNG VL SB-LNG FL

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Manufacturing of turned parts

ELAFLEX Hamburg

Hose assemblies, pressure test (hydrostatic test)

ERV-GR ... ZS

"Green Band" Rubber Expansion Joints with limiters in chemical pumping system

AKD 75 Hy

CouplingSeal CSM

ERV with FSH:

Flame protection cover (open)

Slimline 16 green

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

ElaSil® Silicone hose assemblies

Connecting Triclamp

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 EURO

FWS 50 PTFE

Composite hose with PTFE lining

ELAFLEX Hamburg

Assembling ERV large DN

ERV-GR 80.16 ZS 2

GREEN BAND Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

VK 50 SS

TW male coupling stainless steel

L.P.Gas road tanker, Hose Reel with LPG 50, MannTek DGC

DGC-M 50 SS, DGC-K

Lightweight Gravity Discharge Road Tanker Hose LG 3"

with VX 75-3" Al LG

ZVA Slimline 2 TMV nozzle for Diesel with DRIP STOP spout

DDC-M 25-1" SS

MannTek Dry Disconnect Coupling, DN 25, stainless steel

VSR vacuum support ring for ERV Rubber Expansion Joints

to increase vacuum resistance of a chosen ERV type. Open ring of stainless steel 1.4571

Rail tanker discharge coupling KWK, with elbow DN 80

for damaged / dirty rail tanker or other threaded hose connections. Used e.g. for environmental protection trucks

Offshore Methane gas production

UTS / CHS hose assemblies

EA 866 scuffguard: fuel grade identification 'LPG' to standard

The scuffguard for LPG / Autogas nozzles shows the LPG fuel grade marking required by standard, and offers a large advertising space

Tank container, Antarctica: HD-LT hose assembly, ZVF 25 LT nozzle

Low Temperature types

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

Ship loading various media - STW 150 and UTS 150 hose assemblies

ZVA Slimline 2 GR

blue scuffguard, blue produc sleeve, guard no. 4

Alternative fuels: DME Dimethyl Ester

DGC Dry Gas Coupling, EFL 16 Fluorline hose assembly

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

ERV-G

Pump-tank connection; lateral offset

VB 50 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.