Media Library / Images

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

FGN 2 SS

Flange with male thread, stainless steel

ELAFLEX Hamburg

Hose assemblies, endoscope inspection hose

Elaflon PTFE

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

ZVA Slimline 2 nozzle with hose assembly

EN 12115 hoses: colour marking

Elaflex LTW hose assembly, Matterhorn

Supply of the mountain top station via IBC unloading

Road tanker hose reel, made by Elaflex Italia

with LPG hose assembly

ZVG 2 DISH nozzle for L.P. Gas / Autogas, LPG 16 hose assembly

Rail tanker loading and unloading of petroleum based products

Terminal / gantry: 'Polypal Oil' hose assemblies for bottom loading of road tankers

Lining UPE - resistant to all petrochemical media, also with high content of aromatics or other aggressive additives; cover CR - oil resistant

Rail tanker unloading of petroleum based products

with FWS 80 PP St/St composite hoses and MannTek Dry Disconnect Couplings

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

Elapharm EPH 25 OHM-G

ELAPHARM OHM G electrically conductive 'Ω / T', light grey cover. Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform. Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 DISH nozzle, LPG 16 hose assembly, ARK 19 Safety Break

Flexible bronze pipe connectors

Installed in manhole of a petrol station underground storage tank (UST). Suction pipes towards the dispenser pumps

Oasis BV708, 1" ball valve / isolation valve, CNG fill post for trailer loading with HC200 Quick Coupler

Hot stamping process, TW coupling part

SPANNFIX pinned safety clamps of aluminium

SX 50 Al

ERV-OR

"Orange Band" Rubber Expansion Joints for L.P. Gas, road tanker

ERV-R

"Red Band" Rubber Expansion Joints/ Osmose

ELAFLEX Hamburg

ELAFLEX Hamburg

ERV pressure testing

Hose Reel Spring Rewind

HD 25 C, ZVA 25 AF red, GKG 25, EKG 1200

ERV-G

"Yellow Band" Rubber Expansion Joints for L.P. Gas; pumping station at tank storage

Elaflon Plus FEP

Embossed hose marking

ZVF 50 JET

with HD-C NEON hose assembly

LPG Autogas Adapter (filler inlet) ACME

ACME thread 1 3/4"

Hose assembly TW 63 with SFX 63

TW hose with helix, 'TW' flange with hose tail and Spannfix clamps of aluminium

Adapters / couplers for vehicles fighting dangerous goods incidents:

Dry Disconnect Stanag 3756 DDC- M 50 / 65 / 80 SS NOT x VK 50 SS/Vi Hose sided MK coupling can be coupled without tools