Media Library / Images

Hose assembly TW 63 with SFX 63

TW hose with helix, 'TW' flange with hose tail and Spannfix clamps of aluminium

ZVA Slimline 2 GR, black, guard 3 - top view

Hose Reels group picture

DDC-V Dry Disconnect Couplings for various media

tank storage; TW hose assembly

Aljac Closed Circuit Sampler (CCS)

Hydrant-dispenser

ContiTech Production hose

Tank hose after vulcanisation

Boat refuelling, ZVA Slimline 2 GR

ZVF 50 SIC (Screw In Connection), strainier inspection

Production MannTek, Sweden

Terminal / gantry: TW hose assemblies for bottom loading of road tankers

Adapters / couplers for vehicles fighting dangerous goods incidents:

Adapters Flange FGN 2" SS x VK 50 SS/Vi, FGN 3" SS x VK 50 SS/Vi, FGN 4" SS x VK 50 SS/Vi

MC 75-3" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

ELAFLEX HIBY Tanktechnik, Production Plettenberg / Germany

Assembling ZVA

Slimline 21 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ELAFLEX Hamburg

Assembling COAX hose SL 21, with inner vapour hose, for vapour recovery Stage II

ZVA 25

Special type for solvents / chemicals

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ZVA Slimline 2 and ZVA Slimline 2 GR, special colour light green

ZVA Slimline 2 GR LA (with LeverAssist)

LeverAssist hold-open aid for comfortable refuelling, for countries in which latching is not allowed

ELAFLEX Hamburg

Main building / entrance

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

Road tanker with hose reel -

Quick change system between ZV 500 and ZVA 32 nozzles via DDC Dry Disconnect Coupling

ERV VSRV:

ERV with bolted vacuum support ring. For maximal vacuum resistance of the selected ERV. Bolted ring in stainless steel AISI 316 Ti.

Oasis BV708, 1" ball valve / isolation valve, CNG fill post for trailer loading with HC200 Quick Coupler

Compact Line HD 50, Hose Reel Spring Rewind

FEP 5O, MannTek DDC-M 5O SS

Stainless steel Hose Reel with pneumatic rewind system, HD 50

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

FSH flame protection cover for ERV rubber expansion joints

Use e.g. in ship engine rooms

DDC-M 65-2 1/2" Al

MannTek Dry Disconnect Coupling, aluminium

SD 38 Pyropal

Steam hose with steel braids for wet saturated steam up to 18 bar (210° C) and hot water up to 120° C. For cold water up to 25 bar. Minimum burst pressure 180 bar (1 : 10 safety factor