Media Library / Images

ZVF 50 helicopter refuelling with HD-C hose assembly

France

Customer protected special design ZVA Slimline 2 GR nozzle

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

Elaflex Pacific (Australia)

Manufacturing GasGuard GG1 nozzle

Elaflon Plus PTFE 38

Filling of small containers for chemicals

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

Hose Reel with hydraulic rewind system blue, TW 100, DDC-M 100

HD 38 C, VX 38 - 11/2 Sn

Hose assembly for aircraft refuelling, fitting in contact with medium tin plated

AMKX 50 Ms

'Camlock' brass steel coupler to EN 14420 - 7 with hose tail and Spannfix clamps

MC 75-3" Ms

Female hose coupling for hoses, brass, with Spannloc clamps

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 DISH nozzle

ELAPHARM and Tecnopal hose assemblies

Drum unloading; UTS 32 hose assembly

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, blue.

Fuel delivery at the petrol station

LTW 75 fuel delivery hose

Hose assembly for petroleum based products

LTW 75, VC 75-3", DDC-M 80-3"

ERV-GR 80.16 ZS 2

GREEN BAND Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

Hose assemblies for LPG

DN 25, DN 32, DN 50 / with flange connection, ACME connection, NPT thread

ZVA Slimline 2, dispenser

Estonia

AMX 50 PA

Ammoniac hose to EN ISO 5771 for water-free, liquid and gaseous ammonia.

ZVF 50 JET

with HD-C NEON hose assembly

Unloading chemical road tanker

Solvapal hose assembly with DDC Dry Disconnect Couplings

MKX 80 Ms, coupling hose assembly

Filling of Heating Oil Tanks: Adapter KR 50-2 3/4" (Switzerland)

for difficult to reach filler inlets

Underwing aircraft refuelling

TW 100, SFC 100 TW, HD 63 C Neon

ERV-R 100.16

RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

SPANNFIX pinned Sicherheits Klemmbacken aus aluminium

SX 75 NR Al

HD-C LT, Low Temperature

Antarctica: Low Temperature aircraft refuelling hoses in action

ERV-R Red Band rubber expansion joint, ship engine room