Media Library / Images

ZVA Slimline 2, Sight Glass SG 1" Al, hose assembly

ELAPAC FD flat sealing material

2 or 3 mm thickness, available as coil, standard size seal or in custom shape. An elastic flange seal for tank truck and tank plant construction etc., where rough sealing surfaces require a high adaptability, where flange seals should still have good flexibility to avoid pipe fractures or simple sealing materials because little or no force can be used to tighten the joint.

FFC 50.16 SS

Fixed flange hose fitting of stainless steel, with Spannloc clamps

Elaflon PTFE 50

Universal hose with electrically conductive, seamless lining of PTFE (Polytetrafluorethylene). Suitable for all commonly used chemicals. Suitable for both suction and delivery (Type PTFE D = delivery). Working pressure up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° up to + 150° Celsius (depending on medium). Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min. Meets EN 12115. FDA und USP Class VI conform according EC regulations 1935/2004 and 10/2011.

ERV-G 50x160

Fuel mixer / blender

ERV-W 80.16

WHITE BAND Rubber Expansion Joint for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

TW hose for fire fighting vehicle with extremely long telescopic crane

Unloading petroleum products at the service station (road tanker to UST)

Connection offset UST filling point: LG 3" hose assembly for gravity discharge, LTW 50 hose assembly for vapour balance

ERV-CR ... ZS

"CR" Rubber Expansion Joints; water purification plant

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Production MannTek, Sweden

Elapharm EPH 25 OHM-G

ELAPHARM OHM G electrically conductive 'Ω / T', light grey cover. Corresponds to DIN 26055-3 / EN 16820, Type A. FDA conform. Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.

Feel the difference: ZVA SLIMLINE 2 + ZVA SLIMLINE 2 GR

Petrol station nozzles with and without vapour recovery; premium quality from Elaflex.

Aircraft refuelling Hose Reel

rewind

ELAFIX 40

Magnet adapter for installation in filler necks from DN 40. This adapter allows the refilling of urea solution with ZVA HV for AdBlue^®, without the risk of misfillings. Meets ISO 22241-4.

TSG 3" Rg

tank truck sight glass type TSG 3", one end TW tank truck fl ange according to DIN 28459, other end male thread

IBC unloading

Female hose coupling MC 38-S60 SS (with Spannfix clamps). Direct connection of a hose assembly to the IBC.

ELAFLEX Hamburg, stock

ERV-OR

"Orange Band" Rubber Expansion Joints, road tanker

HD-C Neon, large reel, VK 100 Ms, MB 100 Al

TSVX 50

Hose connectors with double shank of hot stamped brass, with Spannfix safety clamps of hot stamped aluminium.

Rail tanker unloading of petroleum based products

FWS PP St/St composite hose, MannTek Dry Disconnect Coupling, KWZ adapter

ERV-CR

"CR" Rubber Expansion Joints - ballast water treatment skid

ELAFLEX Hamburg

VR Hose Reel Spring Rewind, ZVA Slimline 2 GR blue

for active Vapour Recovery (VR) for gasoline fuels

Type PCS, Polypal Clean

one side with RMC foodstuff fitting / Spannloc clamps stainless steel, other side open (note the inner conductive stripe)

Oasis CNG refuelling equipment:

Ultra Fast Fill System (Diagram, English)

ZVA Slimline 2 yellow / red / blue with SSB 16 Safety Break

Offshore FSRU (Floating Regasification Unit), connector for gasoil sludge / seawater

DDC-V 150 F

LPG ship-to-ship cargo transfer

Danchem PASS composite hose