Media Library / Images

ERV Rubber Expansion Joints

Picture 1

ZVG 2 EURO

(Push-In-Coupling) to EN 13760. One-handed operation possible.

GasGuard nozzle GG 1 DN, hose assembly, nozzle boot NB-GG

DDC-M 100 SS, Elaflon Plus FEP, VC 100-4" SS

Terminal loading / unloading of chemicals with Dry Disconnect coupling and universal hose

Universal hose UTL 38

Polypal Clean hose assembly

Pharmaceutical production

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, yellow.

ZVA Slimline 2, dispenser

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Production plastic parts

Injection Molding

Locomotive refuelling

DDC-V Dry Disconnect Coupling (filler inlet of the locomotive), DDC-K cap

Rubber Expansion Joint ERV-CR 80.16

CR Expansion Joints for cold and warm water, swimming pool water, sea water, waste water (weakly sour or alkaline) also oil containing, cooling water with protective oils against corrosion, lubricating oil, grease and air, compressed air. Temperature range (depending on medium) - 25° C up to + 90° C, temporarily up to + 100° C. Electrically non-conductive.

GasGuard LPG nozzle GG20DN

With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.

Composite hose Danoil 7GG, DDC-M Dry Disconnect Coupling, airport depot

ERV TA:

ERV with white PTFE lining. Used when the chemical resistance of the chosen ERV type is insufficient. Resistant to all commonly used liquids. Electrically isolating, therefore not suitable for flammable liquids in Ex-Zones. Admissible working temperature of expansion joint has to be observed. For maximum pressure of 6 bar – not suitable for vacuum.

Ship loading various media - STW 150 and UTS 150 hose assemblies

Elaflex hoses

PTFE, FEP, HD, UTS

TW connecting hoses

airport depot, gantry

ERV-G 100.16

YELLOW BAND Rubber Expansion Joint suitable for petroleum based products with aromatic content up to 50%, fuels (ethanol content up to 85 %), aviation fuels, town gas and natural gas except liquefied petroleum gas. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

ELAFLEX refuelling equipment:

Quality is in the detail.

ERV-G 1000

'Yellow Band' Rubber Expansion Joint - for petroleum based products

Slimline 21 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

Elaflex hoses

SD, PTFE, LPG, TW, FEP, SL

GasGuard LPG nozzle GG1DN

suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure: 1.7 cm³.

ELAFLEX Hamburg, narrow aisle stock for small parts

ELAFLEX Hamburg

Assembling dispensing hose fitting

Equipment truck for dangerous goods accidents, Elaflon PTFE universal hose assembly, DDC Dry Disconnect Coupling

RS 1 x 11/4 SS

Reducer Female/Male

Petrol station in Singapore

ZVA Slimline 2 nozzle, SSB 16 Safety Break, Slimline hose assembly

CBC-C

Cryogenic Breakaway Coupling for LNG with cable release: before release