Media Library / Images

Slimline 21 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

Anti-Kinking Spiral 'KSS'

The main bending stress area for hose assemblies is directly behind the coupling. To reinforce this area we developed the new Anti-Kinking Spiral 'KSS': suitable for all ELAFLEX hoses, recommended for dynamically strong stressed universal hoses with thermoplastic linings

SG 1" 1x0 Al Propeller

Sight Glass with propelller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

HD 100 C, HD 10 sensing hose

Aircraft Dispenser with DN 100 hose (spiralised marking) and a sensor hose to control the hydrant system.

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Oasis BV708, 1" ball valves, isolation valves, CNG trailer loading

IBC unloading

Coupling of Chemopal chemical hose assembly with AMKC 50 SS (Camlock female with Spannloc attachment) to AMKI male coupling. Use of IBC-adapter RS 60 x 2 SS.

ELAFIX 40 Anti-Siphon

Magnet adapter for installation in filler necks from DN 40. This adapter allows the refilling of urea solution with ZVA HV for AdBlue^®, without the risk of misfillings. Meets ISO 22241-4. – Version with anti-theft protection –

Ship bunkering

Taking probes; VK coupling

HD 63 C NEON, TW 75 E NEON

'NEON' type with reflecting bands or NEON marking in spiral form

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Assembling "ZS" tie rods to ERV rubber expansion joints

Elaflex Pacific (Australia)

Fluorflex FXD universal hose assemblies

with inner corrugation for maximal flexibility. Picture 2

ERV-GR ... ZS

"Green Band" Rubber Expansion Joints with limiters in chemical pumping system

Unloading petroleum products at the service station (road tanker to UST)

LTW hose assembly, MK 80-32° Ms couplers with bent lever. The lever shall always be fully closed for safety reasons. For applications with limited room.

ERV-R

"Red Band" Rubber Expansion Joints; pumping station

Oasis BV701 Ball Valve, with air torque actuator AT101, for CNG

Urea solution filling for light vehicles – parallel to Diesel refuelling

ZVA LV for AdBlue^® / ZVA Slimline 2

Production MannTek, Sweden

Rose Reel spring rewind white, HD 38 C, ZVF 50

FFBV 80, DAC-V 65, DAC-K 2 1/2" Al

MannTek Full Flow Ballvalves (FFBV), one way

ZVA Slimline 2 and ZVA Slimline 2 GR with sight glasses, Slimline hose assemblies

Petrol station, Czech Republic

Hose Reel with hydraulic rewind system orange, LPG 32, DGC-M 50

ZVF 50 AVGAS overwing refuelling

with HD-C hose assembly

SBS 250 - marine cargo hoses with built-in nipples

heavy standard bunkering hose to EN 1765, category S 15

Aviation Dispenser

with VHD 100 C and HD 75 C Neon hose assemblies, SFC 100 TW and SFC 75 TW hose couplings

Ship bunkering with LNG

CBC Cryogenic Breakaway Coupling from MannTek and hose assembly for cryogenic media

MB 80 Al

Dust cap for VK 80, aluminium

Unloading chemical road tanker

UTS hose assembly